Technics EAH-AZ100-K (Black) / Google Pixel Buds Pro 2

Technics EAH-AZ100-K (Black): EAH-AZ100-K black earbuds.

Google Pixel Buds Pro 2: GA12449-series in-ear earbuds; Porcelain, Hazel, Peony, Moonstone, Olive and other colours. The original Pixel Buds Pro and Pixel Buds 2a are separate models.

SpecificationTechnics EAH-AZ100-K (Black)Google Pixel Buds Pro 2
Release year20252024
Driver10 mm magnetic-fluid driver

Aims to control vibration; sound depends on tip fit.

Technics
Custom-designed 11 mm dynamic driver per earbud Google
ConnectivityBluetooth 5.3; LDAC, LC3, AAC, SBC

LDAC supports higher bitrates; LC3 needs LE Audio on both devices.

Technics
Bluetooth 5.4 with Super Wideband; works with Bluetooth 4.0+ devices

Full features need an Android 6.0 or newer phone, a Google Account and an internet connection; basic listening works with an iPhone.

Google
Earbud batteryANC on: up to 10 h AAC, 7 h LDAC, 5 h LC3

Codec and volume change runtime.

Technics
—
Battery with caseANC on: up to 28 h AAC, 18 h LDAC, 15 h LC3

Includes case recharges; not continuous playback.

Technics
—
Noise controlANC, ambient and conversation modes

ANC suppresses noise; ambient mode lets sound in.

Technics
Active Noise Cancellation with Silent Seal 2.0; Transparency mode; active in-ear pressure relief; Conversation Detection

Pressure relief reduces the plugged-ear feeling of sealed earbuds. Conversation Detection pauses music and switches to transparency when you start talking.

Google
ProtectionIPX4 earbuds; case unrated

Splash resistance does not apply to the case.

Technics
—
Weight5.9 g/earbud; 42 g case

Comfort also depends on tip size.

Technics
—
Charging time and inputUSB-C, 5 V/500 mA; earbuds about 2 h, case 2.5 h

Manufacturer timings use USB charging at 25 °C; earbuds and case together take about 3 h.

Technics
—
Quick chargingAbout 90 min of AAC playback with ANC on after 15 min charging

This claim uses specific conditions; it is not a matching LDAC or LC3 runtime claim.

Technics
—
Battery capacities85 mAh per earbud; 550 mAh case

The case provides additional charges; mAh values alone do not determine runtime.

Technics
—
Ear tipsXS, S, M, ML, L; M preinstalled

Five sizes offer sealing options; fit affects sound and noise isolation.

Technics
—
Chip—Google Tensor A1 in each earbud

Google says Tensor A1 adapts audio to the environment up to 3 million times per second and runs noise cancellation twice as strong as the original Pixel Buds Pro; music and noise-cancellation processing run on separate paths.

Google
Microphones—Three mics per earbud; voice accelerometer; wind-blocking mesh covers

The voice accelerometer picks up jaw vibration while you speak to help separate your voice from ambient noise. Google’s Clear Calling and Super Wideband calling require compatible Pixel phones.

Google
Battery—ANC off 12 hours (48 hours with case); ANC on 8 hours (30 hours with case); 5 minutes charge gives 1.5 hours (ANC off)

Google’s blog footnote says figures were measured on pre-production hardware with other features disabled; real-world time may be shorter.

Google
Charging case—USB-C and Qi-certified wireless charging; ringtone speaker for Find Hub; Hall effect sensor for open/close

The case speaker lets you ring a lost case through Find Hub.

Google
Sensors—Capacitive touch (tap and swipe); IR proximity sensor; accelerometer and gyroscope

The proximity sensor pauses music automatically when you take an earbud out; swiping adjusts volume.

Google
Durability—Earbuds IP54; case IPX4

IP54 limits dust ingress and resists splashing water from any direction; the earbuds should not be submerged. The case has no dust rating.

Google
Size and weight—Earbud (medium tip) 22.74 × 23.08 × 17.03 mm, 4.7 g; case 49.9 × 63.3 × 25 mm, 65 g with earbuds

Google says the earbuds are 27% smaller and 24% lighter than the original Pixel Buds Pro.

Google
Software support—Automatic security updates for at least three years from first availability on the US Google Store Google