Google Pixel Buds Pro 2 / Sony WF-1000XM4

Google Pixel Buds Pro 2: GA12449-series in-ear earbuds; Porcelain, Hazel, Peony, Moonstone, Olive and other colours. The original Pixel Buds Pro and Pixel Buds 2a are separate models.

Sony WF-1000XM4: Applies to the WF-1000XM4 true wireless earbuds (black or silver). The WF-1000XM3 and WF-1000XM5 are separate models.

SpecificationGoogle Pixel Buds Pro 2Sony WF-1000XM4
Release year20242021
ChipGoogle Tensor A1 in each earbud

Google says Tensor A1 adapts audio to the environment up to 3 million times per second and runs noise cancellation twice as strong as the original Pixel Buds Pro; music and noise-cancellation processing run on separate paths.

Google
—
Noise controlActive Noise Cancellation with Silent Seal 2.0; Transparency mode; active in-ear pressure relief; Conversation Detection

Pressure relief reduces the plugged-ear feeling of sealed earbuds. Conversation Detection pauses music and switches to transparency when you start talking.

Google
—
DriverCustom-designed 11 mm dynamic driver per earbud Google—
MicrophonesThree mics per earbud; voice accelerometer; wind-blocking mesh covers

The voice accelerometer picks up jaw vibration while you speak to help separate your voice from ambient noise. Google’s Clear Calling and Super Wideband calling require compatible Pixel phones.

Google
—
ConnectivityBluetooth 5.4 with Super Wideband; works with Bluetooth 4.0+ devices

Full features need an Android 6.0 or newer phone, a Google Account and an internet connection; basic listening works with an iPhone.

Google
—
BatteryANC off 12 hours (48 hours with case); ANC on 8 hours (30 hours with case); 5 minutes charge gives 1.5 hours (ANC off)

Google’s blog footnote says figures were measured on pre-production hardware with other features disabled; real-world time may be shorter.

Google
—
Charging caseUSB-C and Qi-certified wireless charging; ringtone speaker for Find Hub; Hall effect sensor for open/close

The case speaker lets you ring a lost case through Find Hub.

Google
—
SensorsCapacitive touch (tap and swipe); IR proximity sensor; accelerometer and gyroscope

The proximity sensor pauses music automatically when you take an earbud out; swiping adjusts volume.

Google
—
DurabilityEarbuds IP54; case IPX4

IP54 limits dust ingress and resists splashing water from any direction; the earbuds should not be submerged. The case has no dust rating.

Google
—
Size and weightEarbud (medium tip) 22.74 × 23.08 × 17.03 mm, 4.7 g; case 49.9 × 63.3 × 25 mm, 65 g with earbuds

Google says the earbuds are 27% smaller and 24% lighter than the original Pixel Buds Pro.

Google
—
Software supportAutomatic security updates for at least three years from first availability on the US Google Store Google—
Type and noise cancelling—True wireless in-ear earbuds; active noise cancelling and Ambient Sound mode

Active noise cancelling picks up outside sound with microphones and cancels it with an inverted signal; Ambient Sound mode lets you hear your surroundings without removing the buds. Automatic wind noise reduction and Speak-to-Chat, which pauses music when you talk, are also available; using them shortens battery life.

Sony
Bluetooth—Bluetooth 5.2, Class 1; about 10 m line of sight; A2DP, AVRCP, HFP, HSP

Range depends on surroundings. Multipoint was missing at launch and was added later by a firmware update.

Sony
Codecs—SBC, AAC, LDAC

LDAC is Sony's codec for sending high-resolution audio over Bluetooth at up to 990 kbps; it needs the 'Priority on sound quality' mode in the Sony | Headphones Connect app, as the factory 'Priority on stable connection' mode does not use LDAC. AAC gives better sound than SBC, mainly on iPhones.

Sony
Frequency range (A2DP)—20 Hz–20 kHz (44.1 kHz sampling); 20 Hz–40 kHz (LDAC, 96 kHz, 990 kbps) Sony
Earbud battery life—Noise cancelling on: up to 8 hours with AAC, up to 5 hours with LDAC (DSEE Extreme off); noise cancelling off: up to 12 hours with AAC

With DSEE Extreme (AI upscaling of compressed music) on AUTO, times are shorter; with LDAC and noise cancelling, for example, it drops to 3.5 hours. Five minutes of charging gives about an hour of music. Talk time is up to 5.5 hours with noise cancelling on. The left and right units may drain at different rates; Sony does not treat this as a fault.

Sony
Charging—USB Type-C (adapter of at least 0.5 A); Qi wireless charging; earbuds charge in about 1.5 hours, case and earbuds together in about 3 hours

The case goes on a Qi pad with the lid closed and the SONY logo facing up. Charging the buds while wet with sweat can corrode the contacts; dry them first.

Sony
Battery type—Built-in rechargeable lithium-ion battery (earbuds and case) Sony
Water resistance—Earbuds IPX4; charging case not water resistant

IPX4 means protection against splashing from any direction; the earbuds cannot be used in water. The rating covers fresh water, tap water and sweat; soapy water, pool water, seawater and hot water are excluded.

Sony
Weight—About 7.3 g per earbud (with M tips); charging case about 41 g Sony