Technics EAH-AZ100-K (Black) / Sony WF-1000XM4

Technics EAH-AZ100-K (Black): EAH-AZ100-K black earbuds.

Sony WF-1000XM4: Applies to the WF-1000XM4 true wireless earbuds (black or silver). The WF-1000XM3 and WF-1000XM5 are separate models.

SpecificationTechnics EAH-AZ100-K (Black)Sony WF-1000XM4
Release year20252021
Driver10 mm magnetic-fluid driver

Aims to control vibration; sound depends on tip fit.

Technics
—
ConnectivityBluetooth 5.3; LDAC, LC3, AAC, SBC

LDAC supports higher bitrates; LC3 needs LE Audio on both devices.

Technics
—
Earbud batteryANC on: up to 10 h AAC, 7 h LDAC, 5 h LC3

Codec and volume change runtime.

Technics
—
Battery with caseANC on: up to 28 h AAC, 18 h LDAC, 15 h LC3

Includes case recharges; not continuous playback.

Technics
—
Noise controlANC, ambient and conversation modes

ANC suppresses noise; ambient mode lets sound in.

Technics
—
ProtectionIPX4 earbuds; case unrated

Splash resistance does not apply to the case.

Technics
—
Weight5.9 g/earbud; 42 g case

Comfort also depends on tip size.

Technics
About 7.3 g per earbud (with M tips); charging case about 41 g Sony
Charging time and inputUSB-C, 5 V/500 mA; earbuds about 2 h, case 2.5 h

Manufacturer timings use USB charging at 25 °C; earbuds and case together take about 3 h.

Technics
—
Quick chargingAbout 90 min of AAC playback with ANC on after 15 min charging

This claim uses specific conditions; it is not a matching LDAC or LC3 runtime claim.

Technics
—
Battery capacities85 mAh per earbud; 550 mAh case

The case provides additional charges; mAh values alone do not determine runtime.

Technics
—
Ear tipsXS, S, M, ML, L; M preinstalled

Five sizes offer sealing options; fit affects sound and noise isolation.

Technics
—
Type and noise cancelling—True wireless in-ear earbuds; active noise cancelling and Ambient Sound mode

Active noise cancelling picks up outside sound with microphones and cancels it with an inverted signal; Ambient Sound mode lets you hear your surroundings without removing the buds. Automatic wind noise reduction and Speak-to-Chat, which pauses music when you talk, are also available; using them shortens battery life.

Sony
Bluetooth—Bluetooth 5.2, Class 1; about 10 m line of sight; A2DP, AVRCP, HFP, HSP

Range depends on surroundings. Multipoint was missing at launch and was added later by a firmware update.

Sony
Codecs—SBC, AAC, LDAC

LDAC is Sony's codec for sending high-resolution audio over Bluetooth at up to 990 kbps; it needs the 'Priority on sound quality' mode in the Sony | Headphones Connect app, as the factory 'Priority on stable connection' mode does not use LDAC. AAC gives better sound than SBC, mainly on iPhones.

Sony
Frequency range (A2DP)—20 Hz–20 kHz (44.1 kHz sampling); 20 Hz–40 kHz (LDAC, 96 kHz, 990 kbps) Sony
Earbud battery life—Noise cancelling on: up to 8 hours with AAC, up to 5 hours with LDAC (DSEE Extreme off); noise cancelling off: up to 12 hours with AAC

With DSEE Extreme (AI upscaling of compressed music) on AUTO, times are shorter; with LDAC and noise cancelling, for example, it drops to 3.5 hours. Five minutes of charging gives about an hour of music. Talk time is up to 5.5 hours with noise cancelling on. The left and right units may drain at different rates; Sony does not treat this as a fault.

Sony
Charging—USB Type-C (adapter of at least 0.5 A); Qi wireless charging; earbuds charge in about 1.5 hours, case and earbuds together in about 3 hours

The case goes on a Qi pad with the lid closed and the SONY logo facing up. Charging the buds while wet with sweat can corrode the contacts; dry them first.

Sony
Battery type—Built-in rechargeable lithium-ion battery (earbuds and case) Sony
Water resistance—Earbuds IPX4; charging case not water resistant

IPX4 means protection against splashing from any direction; the earbuds cannot be used in water. The rating covers fresh water, tap water and sweat; soapy water, pool water, seawater and hot water are excluded.

Sony