NZXT H6 Flow / Lian Li O11 Air Mini

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

Lian Li O11 Air Mini: O11 Air Mini (2021); black O11AMX and white O11AMW. The O11 Dynamic Mini, O11D Mini V2 Flow and full-size O11 Dynamic are separate cases.

SpecificationNZXT H6 FlowLian Li O11 Air Mini
Release year20232021
Case type and materialsCompact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
—
Size and weight435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
—
Motherboard and expansionATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
—
Component clearanceGraphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
—
Fan supportFront-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Top 3 × 120 / 2 × 140 mm; side 2 × 120 mm; bottom 2 × 120 / 2 × 140 mm; front 2 × 120 / 2 × 140 mm; rear 1 × 120 mm Lian Li
Radiator supportUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Top 240 or 280 mm; side 240 mm; bottom 240 or 280 mm; front 240 or 280 mm

When fitting a 240 mm radiator at the top with an ATX board, an offset bracket is used to avoid clashing with memory modules.

Lian Li
Included fans3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
2 × 140 mm PWM at the front, 1 × 120 mm PWM at the rear

PWM fans adjust their speed to temperature using a signal from the motherboard.

Lian Li
Front I/O2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
2 × USB 3.0, 1 × USB 3.1 Type-C, 1 × HD Audio

The Type-C port needs a matching front-panel USB-C header on the motherboard.

Lian Li
Storage and assembly2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT
—
Size and materials—400 (D) × 288 (W) × 384 (H) mm; 4 mm aluminium panel, 0.8 mm mesh panel, 4 mm tempered glass

The mesh pattern on the front, top and side is designed to let fans draw air straight from outside.

Lian Li
Motherboard—E-ATX (up to 280 mm wide), ATX, Micro-ATX, Mini-ITX

The 7-slot back panel is for ATX, Micro-ATX and ITX; the 5-slot back panel is for Micro-ATX and ITX. Both are included.

Lian Li
Graphics card and vertical mounting—Up to 362 mm long; 7 or 5 expansion slots; vertical GPU support (top or bottom mode)

With the vertical GPU bracket in top mode, two 120 mm fans can be fitted under the card; in bottom mode there is no room for them.

Lian Li
CPU cooler and power supply—CPU cooler up to 170 mm; ATX power supply up to 200 mm Lian Li
Storage—6 × 2.5-inch SSD or 3 × 2.5-inch SSD + 3 × 3.5-inch HDD

Drives mount in the chamber behind the motherboard tray.

Lian Li
Dust filter—1 × removable bottom dust tray Lian Li