NZXT H5 Flow (2024) Black / Lian Li O11 Air Mini

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

Lian Li O11 Air Mini: O11 Air Mini (2021); black O11AMX and white O11AMW. The O11 Dynamic Mini, O11D Mini V2 Flow and full-size O11 Dynamic are separate cases.

SpecificationNZXT H5 Flow (2024) BlackLian Li O11 Air Mini
Release year20242021
Form factorCompact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
E-ATX (up to 280 mm wide), ATX, Micro-ATX, Mini-ITX

The 7-slot back panel is for ATX, Micro-ATX and ITX; the 5-slot back panel is for Micro-ATX and ITX. Both are included.

Lian Li
MaterialsSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
—
Size and weight465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
—
ClearancesCPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
—
Fan mountsFront 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
—
Radiator supportFront up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Top 240 or 280 mm; side 240 mm; bottom 240 or 280 mm; front 240 or 280 mm

When fitting a 240 mm radiator at the top with an ATX board, an offset bracket is used to avoid clashing with memory modules.

Lian Li
Included fans2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
2 × 140 mm PWM at the front, 1 × 120 mm PWM at the rear

PWM fans adjust their speed to temperature using a signal from the motherboard.

Lian Li
Front I/O1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
2 × USB 3.0, 1 × USB 3.1 Type-C, 1 × HD Audio

The Type-C port needs a matching front-panel USB-C header on the motherboard.

Lian Li
Expansion and drives7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT—
Warranty and model code2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT—
Size and materials—400 (D) × 288 (W) × 384 (H) mm; 4 mm aluminium panel, 0.8 mm mesh panel, 4 mm tempered glass

The mesh pattern on the front, top and side is designed to let fans draw air straight from outside.

Lian Li
Graphics card and vertical mounting—Up to 362 mm long; 7 or 5 expansion slots; vertical GPU support (top or bottom mode)

With the vertical GPU bracket in top mode, two 120 mm fans can be fitted under the card; in bottom mode there is no room for them.

Lian Li
CPU cooler and power supply—CPU cooler up to 170 mm; ATX power supply up to 200 mm Lian Li
Fan support—Top 3 × 120 / 2 × 140 mm; side 2 × 120 mm; bottom 2 × 120 / 2 × 140 mm; front 2 × 120 / 2 × 140 mm; rear 1 × 120 mm Lian Li
Storage—6 × 2.5-inch SSD or 3 × 2.5-inch SSD + 3 × 3.5-inch HDD

Drives mount in the chamber behind the motherboard tray.

Lian Li
Dust filter—1 × removable bottom dust tray Lian Li