NZXT H6 Flow / Lian Li LANCOOL III (black, LANCOOL 3-X)

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

Lian Li LANCOOL III (black, LANCOOL 3-X): LANCOOL 3-X: black version with four 140 mm PWM fans. The white LANCOOL 3-W and the ARGB-fan 3R-X and 3R-W are colour and fan options of the same case; the LANCOOL 207 and 216 are separate cases.

SpecificationNZXT H6 FlowLian Li LANCOOL III (black, LANCOOL 3-X)
Release year20232022
Case type and materialsCompact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
—
Size and weight435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
—
Motherboard and expansionATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
—
Component clearanceGraphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
—
Fan supportFront-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Front 3 × 120/140 mm, top 3 × 120/140 mm, rear 1 × 120/140 mm, above the PSU shroud 3 × 120 mm Lian Li
Radiator supportUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Front 360/420 mm, top 360/420 mm, above the PSU shroud 360 mm Lian Li
Included fans3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
3 × 140 mm PWM at the front, 1 × 140 mm PWM at the rear; 200–1800 rpm, 83.5 CFM, 33 dB(A)

On the ARGB-fan 3R versions the fan speed is 300–1650 rpm.

Lian Li
Front I/O2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Power, reset, 2 × USB 3.0, 1 × USB Type-C, audio Lian Li
Storage and assembly2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT
—
Dimensions—526 × 238 × 523 mm (D × W × H) Lian Li
Motherboard and power supply—E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; ATX power supply up to 220 mm Lian Li
Materials—0.8 mm SGCC steel; 4 mm tempered glass on both sides; aluminium door handles

The side glass panels are hinged and open like doors.

Lian Li
Component clearances—Graphics card up to 435 mm; CPU cooler up to 187 mm Lian Li
Storage—2 + 3 + 3 × 2.5-inch bays and a 4 × 3.5/2.5-inch drive cage Lian Li
Expansion slots—8 Lian Li
Dust filter and warranty—1 bottom dust filter; 1-year warranty Lian Li