Lian Li LANCOOL 217 INF / NZXT H5 Flow (2024) Black

Lian Li LANCOOL 217 INF: LAN217INFX · black

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

SpecificationLian Li LANCOOL 217 INFNZXT H5 Flow (2024) Black
Release year20252024
Dimensions482 × 238 × 503 mm Lian Li—
MaterialsSteel · 4 mm tempered glass Lian LiSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
MotherboardsSSI-EEB ≤330 mm; E-ATX ≤280 mm; ATX/mATX/ITX Lian Li—
Rear connectorsATX and mATX support Lian Li—
Graphics cardUp to 380 mm Lian Li—
CPU coolerUp to 180 mm Lian Li—
Included fansFront: 2 × 170 mm; rear: 1 × 140 mm Lian Li2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
Top fan positions3 × 120 mm or 2 × 140 mm Lian Li—
360 mm radiatorTop; total thickness ≤85 mm, length ≤406.5 mm Lian Li—
280 mm radiatorTop; total thickness ≤60 mm Lian Li—
Lower fan options3 × 120 mm above or 2 × 120 mm below PSU shroud

Alternative layouts, not five simultaneous fan positions.

Lian Li
—
PSU lengthStandard ≤220 mm; rotated ≤180 mm Lian Li—
Front connections2 × USB-A 3.0; USB-C 3.2; combined audio Lian Li—
Expansion7 slots; rotatable PCIe bracket Lian Li—
Lighting controlM1/M2 buttons; separate L-Wireless controller for L-Connect 3 Lian Li—
Form factor—Compact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
Motherboard—E-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
Size and weight—465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
Clearances—CPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
Fan mounts—Front 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
Radiator support—Front up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Front I/O—1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Expansion and drives—7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT
Warranty and model code—2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT