Lian Li O11 Air Mini / Lian Li LANCOOL 215 (black, 215X)

Lian Li O11 Air Mini: O11 Air Mini (2021); black O11AMX and white O11AMW. The O11 Dynamic Mini, O11D Mini V2 Flow and full-size O11 Dynamic are separate cases.

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationLian Li O11 Air MiniLian Li LANCOOL 215 (black, 215X)
Release year20212020
Size and materials400 (D) × 288 (W) × 384 (H) mm; 4 mm aluminium panel, 0.8 mm mesh panel, 4 mm tempered glass

The mesh pattern on the front, top and side is designed to let fans draw air straight from outside.

Lian Li
—
MotherboardE-ATX (up to 280 mm wide), ATX, Micro-ATX, Mini-ITX

The 7-slot back panel is for ATX, Micro-ATX and ITX; the 5-slot back panel is for Micro-ATX and ITX. Both are included.

Lian Li
—
Graphics card and vertical mountingUp to 362 mm long; 7 or 5 expansion slots; vertical GPU support (top or bottom mode)

With the vertical GPU bracket in top mode, two 120 mm fans can be fitted under the card; in bottom mode there is no room for them.

Lian Li
—
CPU cooler and power supplyCPU cooler up to 170 mm; ATX power supply up to 200 mm Lian Li—
Included fans2 × 140 mm PWM at the front, 1 × 120 mm PWM at the rear

PWM fans adjust their speed to temperature using a signal from the motherboard.

Lian Li
Front 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Fan supportTop 3 × 120 / 2 × 140 mm; side 2 × 120 mm; bottom 2 × 120 / 2 × 140 mm; front 2 × 120 / 2 × 140 mm; rear 1 × 120 mm Lian LiFront (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator supportTop 240 or 280 mm; side 240 mm; bottom 240 or 280 mm; front 240 or 280 mm

When fitting a 240 mm radiator at the top with an ATX board, an offset bracket is used to avoid clashing with memory modules.

Lian Li
Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Storage6 × 2.5-inch SSD or 3 × 2.5-inch SSD + 3 × 3.5-inch HDD

Drives mount in the chamber behind the motherboard tray.

Lian Li
2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Front I/O2 × USB 3.0, 1 × USB 3.1 Type-C, 1 × HD Audio

The Type-C port needs a matching front-panel USB-C header on the motherboard.

Lian Li
Power and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
Dust filter1 × removable bottom dust tray Lian Li—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Dimensions—462 mm depth × 215 mm width × 482 mm height Lian Li
Materials—Steel; 4.0 mm tempered glass side panel Lian Li
Motherboard support—E-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Clearances—Graphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Expansion slots—7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li