NZXT H6 Flow / Fractal Design Torrent Black Solid

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

Fractal Design Torrent Black Solid: Applies to the Torrent Black Solid (FD-C-TOR1A-05) with steel side panels and Dynamic fans. The TG Light Tint, RGB TG and white versions share the body but differ in panels and fans; the Torrent Compact and Torrent Nano are smaller models.

SpecificationNZXT H6 FlowFractal Design Torrent Black Solid
Release year20232021
Case type and materialsCompact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
—
Size and weight435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
—
Motherboard and expansionATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
—
Component clearanceGraphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
—
Fan supportFront-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
—
Radiator supportUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Front and bottom: 120, 140, 240, 280, 360, 420 mm; rear: 120, 140 mm Fractal Design
Included fans3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
2 x Dynamic X2 GP-18 (180 mm) at the front, 3 x Dynamic GP-14 (140 mm) at the bottom; PWM

Fractal Design says the five fans deliver high airflow out of the box and can be run from the motherboard through the included fan hub. No rear fan is included.

Fractal Design
Front I/O2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
—
Storage and assembly2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT
—
Design and panels—Airflow-focused case; open-grille front panel; steel left and right side panels (Solid, no glass); black

On the Solid version both side panels are steel, so the interior is not visible; tempered-glass (TG) and RGB-fan versions of the same body are sold separately.

Fractal Design
Fan mounts—Front 3 x 120/140 mm or 2 x 180 mm; bottom 3 x 120/140 mm or 2 x 180 mm; rear 1 x 120/140 mm

The large bottom fan mounts blow air straight at the graphics card.

Fractal Design
Component clearances—Graphics card up to 461 mm; CPU cooler up to 188 mm; ATX power supply up to 230 mm

The bundled GPU support bracket keeps heavy cards from sagging; it is user-assembled.

Fractal Design
Motherboard support—E-ATX, ATX, Micro ATX, Mini-ITX, SSI-EEB, SSI-CEB; 7 expansion slots Fractal Design
Storage—2 x 3.5-inch and 4 x 2.5-inch dedicated drive mounts Fractal Design
Front panel—2 x USB Type-A 5 Gbps, 1 x USB Type-C 20 Gbps, headphone and microphone jacks, power and reset buttons Fractal Design
Cable management and filters—32 mm of cable space behind the motherboard tray; cable grommets and hook-and-loop straps; front and bottom dust filters; tool-less side panels, drive brackets, top panel and bottom fan bracket Fractal Design
Size, weight and warranty—544 x 242 x 530 mm (L x W x H); 62.89 L; 10.4 kg net; 2-year warranty; SKU FD-C-TOR1A-05 Fractal Design