Phanteks NV5 MKII / NZXT H6 Flow

Phanteks NV5 MKII: PH-NV523TG_DBK02 · Satin Black · D-RGB · no fans included

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

SpecificationPhanteks NV5 MKIINZXT H6 Flow
Release year20242023
Model codePH-NV523TG_DBK02; D-RGB, Satin Black Phanteks—
Case typeMid-tower; steel chassis, tempered glass Phanteks—
Dimensions239 × 477 × 528 mm

The manufacturer does not state the axis order.

Phanteks
—
WeightNet 11.28 kg; gross 13.97 kg Phanteks—
Motherboard supportE-ATX, ATX, Micro-ATX, Mini-ITX; E-ATX up to 280 mm without the GPU support bracket Phanteks—
Rear-connector motherboardsHidden-connector motherboards supported: ASUS BTF, MSI Project Zero, Gigabyte Project Stealth Phanteks—
Graphics card clearanceLength up to 440 mm

The product page calls the 170 mm figure height; the installation guide calls it width.

Phanteks
—
Vertical GPU mounting3 slots; riser cable sold separately Phanteks—
GPU support bracketOne included in the box Phanteks—
CPU cooler heightUp to 180 mm Phanteks—
Power supplyUp to 230 mm long Phanteks—
Expansion slots7 PCI slots Phanteks—
Fan positionsEight 120 mm in total: 3 top, 3 side, 1 rear, 1 bottom; no 140 mm positions

The manufacturer presents the bottom fan as feeding air directly to the GPU.

Phanteks
—
Included fansNo fans in the scope of delivery

The installation guide’s contents list shows no fans either.

Phanteks
3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Radiator mountsTop and side: up to 360 mm; rear: 120 mm

The top and side positions can hold two 360 mm radiators at once.

Phanteks
—
Storage bays4 × 2.5-inch SSD and 3 × 3.5-inch HDD bays Phanteks—
Front I/O1 × USB-C 3.2 Gen 2, 2 × USB 3.0, microphone/headphone, power button, D-RGB mode and colour buttons

The guide lists a reset button but the product page does not, so it is not stated here.

Phanteks
2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
LightingBuilt-in D-RGB controller; works without software

An optional Premium D-RGB kit is sold separately.

Phanteks
—
Dust filtrationUltra-fine mesh on the top and side panels Phanteks—
PSU coverRemovable for access to power cables Phanteks—
Warranty5-year limited warranty Phanteks—
Case type and materials—Compact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
Size and weight—435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
Motherboard and expansion—ATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Component clearance—Graphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
Fan support—Front-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Radiator support—Up to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Storage and assembly—2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT