NZXT H7 Flow (2024) / NZXT H6 Flow

NZXT H7 Flow (2024): CM-H72FB-01; black, non-RGB version

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

SpecificationNZXT H7 Flow (2024)NZXT H6 Flow
Release year20242023
Form factorMid-tower NZXT—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX NZXT—
Back-connect motherboardNot supported NZXT—
MaterialsSGCC steel; dark tinted tempered glass NZXT—
Dimensions544 × 244 × 468 mm; with feet NZXT—
CPU coolerUp to 185 mm NZXT—
GPU lengthUp to 410 mm NZXT—
Power supplyATX; up to 200 mm NZXT—
Cable clearanceUp to 34.5 mm NZXT—
Top radiatorUp to 360 mm or 280 mm NZXT—
Top thickness limit57 mm combined radiator and fan thickness for 140/280 mm radiators NZXT—
Front radiatorUp to 360 mm or 420 mm NZXT—
Rear radiator120 or 140 mm NZXT—
Front fans3 × 120 or 3 × 140 mm NZXT—
Top fans3 × 120 or 2 × 140 mm NZXT—
Bottom fans3 × 120 mm NZXT—
Rear fan1 × 120 or 140 mm NZXT—
Included fans3 × F120Q Airflow case version; 3-pin DC NZXT3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Fan speed1350 ± 150 RPM NZXT—
Front connections2 USB-A; 1 USB-C (USB 3.2 Gen 2x2); 3.5 mm combo jack NZXT—
Expansion7 standard slots; vertical kit separate NZXT—
Drive bays2+2 2.5-inch; 2 3.5-inch NZXT—
Fan controllerNot included NZXT—
Warranty2 years on manufacturer page; local terms apply NZXT—
Case type and materials—Compact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
Size and weight—435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
Motherboard and expansion—ATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Component clearance—Graphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
Fan support—Front-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Radiator support—Up to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Front I/O—2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Storage and assembly—2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT