NZXT H5 Flow (2024) Black / Phanteks NV5 MKII

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

Phanteks NV5 MKII: PH-NV523TG_DBK02 · Satin Black · D-RGB · no fans included

SpecificationNZXT H5 Flow (2024) BlackPhanteks NV5 MKII
Release year20242024
Form factorCompact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
—
MaterialsSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
—
Size and weight465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
—
ClearancesCPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
—
Fan mountsFront 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
—
Radiator supportFront up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
—
Included fans2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
No fans in the scope of delivery

The installation guide’s contents list shows no fans either.

Phanteks
Front I/O1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
1 × USB-C 3.2 Gen 2, 2 × USB 3.0, microphone/headphone, power button, D-RGB mode and colour buttons

The guide lists a reset button but the product page does not, so it is not stated here.

Phanteks
Expansion and drives7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT—
Warranty and model code2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT—
Model code—PH-NV523TG_DBK02; D-RGB, Satin Black Phanteks
Case type—Mid-tower; steel chassis, tempered glass Phanteks
Dimensions—239 × 477 × 528 mm

The manufacturer does not state the axis order.

Phanteks
Weight—Net 11.28 kg; gross 13.97 kg Phanteks
Motherboard support—E-ATX, ATX, Micro-ATX, Mini-ITX; E-ATX up to 280 mm without the GPU support bracket Phanteks
Rear-connector motherboards—Hidden-connector motherboards supported: ASUS BTF, MSI Project Zero, Gigabyte Project Stealth Phanteks
Graphics card clearance—Length up to 440 mm

The product page calls the 170 mm figure height; the installation guide calls it width.

Phanteks
Vertical GPU mounting—3 slots; riser cable sold separately Phanteks
GPU support bracket—One included in the box Phanteks
CPU cooler height—Up to 180 mm Phanteks
Power supply—Up to 230 mm long Phanteks
Expansion slots—7 PCI slots Phanteks
Fan positions—Eight 120 mm in total: 3 top, 3 side, 1 rear, 1 bottom; no 140 mm positions

The manufacturer presents the bottom fan as feeding air directly to the GPU.

Phanteks
Radiator mounts—Top and side: up to 360 mm; rear: 120 mm

The top and side positions can hold two 360 mm radiators at once.

Phanteks
Storage bays—4 × 2.5-inch SSD and 3 × 3.5-inch HDD bays Phanteks
Lighting—Built-in D-RGB controller; works without software

An optional Premium D-RGB kit is sold separately.

Phanteks
Dust filtration—Ultra-fine mesh on the top and side panels Phanteks
PSU cover—Removable for access to power cables Phanteks
Warranty—5-year limited warranty Phanteks