NZXT H9 Flow (2025, CM-H92FB-01) / NZXT H5 Flow (2024) Black

NZXT H9 Flow (2025, CM-H92FB-01): Black plain Flow, not RGB/Plus bundle.

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

SpecificationNZXT H9 Flow (2025, CM-H92FB-01)NZXT H5 Flow (2024) Black
Release year20252024
Form factorDual-chamber E-ATX case; E-ATX boards up to 277 mm wide

The second chamber separates cables and PSU; check board width.

NZXT
Compact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
GPU clearanceUp to 459 mm; 410 mm with 56 mm front fans/420 mm radiator

Clearance depends on front cooling; also check card thickness and power cables.

NZXT
—
CPU cooler165 mm maximum height

The height limit matters for side-panel clearance.

NZXT
—
Power supplyATX PSU up to 200 mm

A long PSU can reduce cable-bend space in the second chamber.

NZXT
—
Radiators and fansFront 420 mm radiator support; multiple fan positions

A thick front radiator can reduce GPU clearance; plan fans and radiator together.

NZXT
—
Dimensions506×315×481 mm; 12.46 kg

Case weight excludes parts; width affects desk space.

NZXT
—
Panel and accessoriesBlack tinted tempered glass; no RGB control hub in plain Flow

The CM-H92FB-01 package does not include an RGB controller.

NZXT
—
Front ports2× USB-A; 1× USB 3.2 Gen 2x2 Type-C; 3.5 mm combo audio

The Type-C port’s 20 Gbps class requires a compatible motherboard internal header.

NZXT
—
Included fans3×140 mm F140Q at the front; 1×120 mm F120Q at the rear

Standard Flow fans differ from the RGB bundles; bottom fans are not supplied.

NZXT
2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
Drive mounting4+2 2.5-inch positions or 2 3.5-inch positions

Shared mounting positions are not all independent simultaneous drive bays.

NZXT
—
Top radiator clearance80 mm combined thickness for 120 mm-based radiators/fans; 62 mm for 140 mm-based

Thickness clearance must be checked separately from a radiator’s 360/420 mm length class.

NZXT
—
Warranty and filterTwo-year manufacturer warranty; removable bottom magnetic filter

Regional warranty terms apply; the bottom filter can be removed for maintenance.

NZXT
—
Motherboard—E-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
Materials—SGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
Size and weight—465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
Clearances—CPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
Fan mounts—Front 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
Radiator support—Front up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Front I/O—1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Expansion and drives—7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT
Warranty and model code—2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT