NZXT H5 Flow (2024) Black / NZXT H7 Flow (2024)

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

NZXT H7 Flow (2024): CM-H72FB-01; black, non-RGB version

SpecificationNZXT H5 Flow (2024) BlackNZXT H7 Flow (2024)
Release year20242024
Form factorCompact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
Mid-tower NZXT
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
E-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX NZXT
MaterialsSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
SGCC steel; dark tinted tempered glass NZXT
Size and weight465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
—
ClearancesCPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
—
Fan mountsFront 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
—
Radiator supportFront up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
—
Included fans2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
3 × F120Q Airflow case version; 3-pin DC NZXT
Front I/O1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
—
Expansion and drives7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT—
Warranty and model code2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT—
Back-connect motherboard—Not supported NZXT
Dimensions—544 × 244 × 468 mm; with feet NZXT
CPU cooler—Up to 185 mm NZXT
GPU length—Up to 410 mm NZXT
Power supply—ATX; up to 200 mm NZXT
Cable clearance—Up to 34.5 mm NZXT
Top radiator—Up to 360 mm or 280 mm NZXT
Top thickness limit—57 mm combined radiator and fan thickness for 140/280 mm radiators NZXT
Front radiator—Up to 360 mm or 420 mm NZXT
Rear radiator—120 or 140 mm NZXT
Front fans—3 × 120 or 3 × 140 mm NZXT
Top fans—3 × 120 or 2 × 140 mm NZXT
Bottom fans—3 × 120 mm NZXT
Rear fan—1 × 120 or 140 mm NZXT
Fan speed—1350 ± 150 RPM NZXT
Front connections—2 USB-A; 1 USB-C (USB 3.2 Gen 2x2); 3.5 mm combo jack NZXT
Expansion—7 standard slots; vertical kit separate NZXT
Drive bays—2+2 2.5-inch; 2 3.5-inch NZXT
Fan controller—Not included NZXT
Warranty—2 years on manufacturer page; local terms apply NZXT