Lian Li Vector V100R / NZXT H6 Flow

Lian Li Vector V100R: Lian Li Vector V100R (2025), mid-tower case with four pre-installed 120 mm ARGB fans; V100RX black, V100RW white. The fanless V100 (V100X / V100W) has the same chassis.

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

SpecificationLian Li Vector V100RNZXT H6 Flow
Release year20252023
Type and sizeMid-tower; 446 x 235.5 x 484.65 mm (L x W x H); steel, tempered glass and plastic

Dimensions are length, width and height; plan for 446 mm of depth on the desk. The front and side panels are 4 mm tempered glass, and with no corner pillar the hardware inside is visible over 270 degrees.

Lian Li
—
Motherboard supportATX, M-ATX, Mini-ITX; back-connect ATX and M-ATX motherboards

On back-connect motherboards the power and data connectors are on the back of the board, so cables are hidden from the front glass. They are a separate type of board; regular motherboards fit too.

Lian Li
—
Fan support and included fansTop: 3 x 120 mm or 2 x 140 mm; side: 3 x 120 mm (pre-installed); rear: 1 x 120 mm (pre-installed) or 1 x 140 mm; bottom: 2 x 120 mm; up to 9 fans in total

The V100R version ships with three side and one rear 120 mm ARGB fan installed; the fanless V100 version has none. Lian Li gives the side mesh panel a 40.3% perforation rate.

Lian Li
—
Radiator and coolerUp to a 360 mm radiator on top (height under 60 mm); up to 178 mm CPU cooler height

A liquid cooling radiator only fits in the top position; Lian Li limits radiator height to under 60 mm.

Lian Li
—
Graphics cardUp to 420 mm graphics card length; 7 PCIe expansion slots; pre-installed GB001 GPU support bracket

420 mm fits even the longest high-end graphics cards. The bracket keeps a heavy card from sagging over time and straining the PCIe slot.

Lian Li
—
Power supply and storageATX power supply (under 220 mm); 1 x 2.5-inch SSD behind the tray, 1 x 3.5-inch HDD at the bottom

The power supply sits in the second chamber, where cables are hidden. Drive space is limited: there is only one 2.5-inch and one 3.5-inch bay; M.2 SSDs go on the motherboard.

Lian Li
—
Front I/OOn the side: 2 x USB 3.0, 1 x USB 3.1 Type-C, 1 x audio, power and reset buttons

The ports sit on the lower side of the case rather than the front. The USB-C port needs a front-panel USB-C header on the motherboard.

Lian Li
2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Lighting and other26-LED ARGB light strip (syncs with motherboard software); removable hand rest; bottom dust filter; warranty 1 year for the case, 2 years for the fans

The ARGB strip is controlled with one button or the motherboard's lighting software. Lian Li's table lists a dust filter at the bottom only.

Lian Li
—
Model numbersV100RX (black), V100RW (white); fanless version V100X / V100W

The R marks the version with fans; case dimensions and hardware compatibility are the same as the fanless V100.

Lian Li
—
Case type and materials—Compact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
Size and weight—435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
Motherboard and expansion—ATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Component clearance—Graphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
Fan support—Front-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Radiator support—Up to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Included fans—3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Storage and assembly—2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT