Lian Li Vector V100R / NZXT H5 Flow (2024) Black

Lian Li Vector V100R: Lian Li Vector V100R (2025), mid-tower case with four pre-installed 120 mm ARGB fans; V100RX black, V100RW white. The fanless V100 (V100X / V100W) has the same chassis.

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

SpecificationLian Li Vector V100RNZXT H5 Flow (2024) Black
Release year20252024
Type and sizeMid-tower; 446 x 235.5 x 484.65 mm (L x W x H); steel, tempered glass and plastic

Dimensions are length, width and height; plan for 446 mm of depth on the desk. The front and side panels are 4 mm tempered glass, and with no corner pillar the hardware inside is visible over 270 degrees.

Lian Li
—
Motherboard supportATX, M-ATX, Mini-ITX; back-connect ATX and M-ATX motherboards

On back-connect motherboards the power and data connectors are on the back of the board, so cables are hidden from the front glass. They are a separate type of board; regular motherboards fit too.

Lian Li
—
Fan support and included fansTop: 3 x 120 mm or 2 x 140 mm; side: 3 x 120 mm (pre-installed); rear: 1 x 120 mm (pre-installed) or 1 x 140 mm; bottom: 2 x 120 mm; up to 9 fans in total

The V100R version ships with three side and one rear 120 mm ARGB fan installed; the fanless V100 version has none. Lian Li gives the side mesh panel a 40.3% perforation rate.

Lian Li
—
Radiator and coolerUp to a 360 mm radiator on top (height under 60 mm); up to 178 mm CPU cooler height

A liquid cooling radiator only fits in the top position; Lian Li limits radiator height to under 60 mm.

Lian Li
—
Graphics cardUp to 420 mm graphics card length; 7 PCIe expansion slots; pre-installed GB001 GPU support bracket

420 mm fits even the longest high-end graphics cards. The bracket keeps a heavy card from sagging over time and straining the PCIe slot.

Lian Li
—
Power supply and storageATX power supply (under 220 mm); 1 x 2.5-inch SSD behind the tray, 1 x 3.5-inch HDD at the bottom

The power supply sits in the second chamber, where cables are hidden. Drive space is limited: there is only one 2.5-inch and one 3.5-inch bay; M.2 SSDs go on the motherboard.

Lian Li
—
Front I/OOn the side: 2 x USB 3.0, 1 x USB 3.1 Type-C, 1 x audio, power and reset buttons

The ports sit on the lower side of the case rather than the front. The USB-C port needs a front-panel USB-C header on the motherboard.

Lian Li
1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Lighting and other26-LED ARGB light strip (syncs with motherboard software); removable hand rest; bottom dust filter; warranty 1 year for the case, 2 years for the fans

The ARGB strip is controlled with one button or the motherboard's lighting software. Lian Li's table lists a dust filter at the bottom only.

Lian Li
—
Model numbersV100RX (black), V100RW (white); fanless version V100X / V100W

The R marks the version with fans; case dimensions and hardware compatibility are the same as the fanless V100.

Lian Li
—
Form factor—Compact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
Motherboard—E-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
Materials—SGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
Size and weight—465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
Clearances—CPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
Fan mounts—Front 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
Radiator support—Front up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Included fans—2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
Expansion and drives—7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT
Warranty and model code—2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT