Lian Li O11D MINI V2 / NZXT H7 Flow (2024)

Lian Li O11D MINI V2: Applies to the standard version without fans: O11DMIV2X (black) and O11DMIV2W (white). The O11D MINI V2 Flow (O11DMIV2FX/FW) with five reverse-blade fans has the same body; the original O11 Dynamic Mini and the O11 Air Mini are separate models.

NZXT H7 Flow (2024): CM-H72FB-01; black, non-RGB version

SpecificationLian Li O11D MINI V2NZXT H7 Flow (2024)
Release year20252024
Design and materialsDual-chamber case; 2 mm aluminium panel, 1 mm mesh panel, 4.0 mm tempered glass; black (O11DMIV2X) or white (O11DMIV2W)

The front and side glass panels meet at a frameless corner; the power supply and drives sit in a separate chamber behind the motherboard tray. The floor is angled 10° to direct air at the GPU.

Lian Li
—
Motherboard supportATX, Micro-ATX, Mini-ITX; Back-Connect ATX; 5 expansion slots

Back-connect boards take their cables from behind, leaving the front clean; support covers ATX back-connect boards only. If the 24-pin area clashes, Lian Li offers an optional replacement bracket on request. Standoffs can be moved vertically for Micro-ATX boards.

Lian Li
—
Component clearancesGraphics card up to 400 mm; CPU cooler up to 160 mm; ATX power supply up to 200 mm

ATX power supplies up to 200 mm fit thanks to an extended side mesh panel without widening the case; the PSU's power socket must sit at least 12 mm from the edge. With a Micro-ATX board and the GPU in the second slot, cards thicker than 72 mm may hit the bottom fans.

Lian Li
—
Radiator supportTop 240/280/360 mm; side 240 mm

A 280 mm top radiator is supported only with Micro-ATX and Mini-ITX boards mounted one slot lower. The top fan/radiator bracket is removable, so parts can be fitted outside and dropped in with the bracket.

Lian Li
—
Fan supportTop 3 x 120 mm or 2 x 140 mm; side 2 x 120 mm; bottom 3 x 120 mm; rear 1 x 120 mm; no fans included (the Flow version has five reverse-blade 120 mm PWM fans)

Unused fan mounts can be closed with tool-less covers to steer airflow.

Lian Li
—
StorageDrive cage: 2 x 2.5-inch SSD or 2 x 3.5-inch HDD; behind the motherboard tray: 2 x 2.5-inch SSD

When unused, the drive cages double as cable storage.

Lian Li
—
Front panel2 x USB 3.0, 1 x USB 3.2 Type-C, audio, power button; can be placed at the top or bottom

When the I/O module is moved to the top, the lower module and its cover can be removed to improve bottom intake. The Type-C port's speed is not stated in the table.

Lian Li
—
GPU supportHorizontal and vertical GPU anti-sag brackets; height-adjustable vertical GPU bracket

They are meant to stop heavy graphics cards sagging in the slot; the vertical bracket adjusts in height for thick cards.

Lian Li
—
Size, dust filter and warranty423.6 x 273.3 x 391.95 mm (D x W x H); 1 bottom dust filter; 1-year warranty Lian Li—
Form factor—Mid-tower NZXT
Motherboard—E-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX NZXT
Back-connect motherboard—Not supported NZXT
Materials—SGCC steel; dark tinted tempered glass NZXT
Dimensions—544 × 244 × 468 mm; with feet NZXT
CPU cooler—Up to 185 mm NZXT
GPU length—Up to 410 mm NZXT
Power supply—ATX; up to 200 mm NZXT
Cable clearance—Up to 34.5 mm NZXT
Top radiator—Up to 360 mm or 280 mm NZXT
Top thickness limit—57 mm combined radiator and fan thickness for 140/280 mm radiators NZXT
Front radiator—Up to 360 mm or 420 mm NZXT
Rear radiator—120 or 140 mm NZXT
Front fans—3 × 120 or 3 × 140 mm NZXT
Top fans—3 × 120 or 2 × 140 mm NZXT
Bottom fans—3 × 120 mm NZXT
Rear fan—1 × 120 or 140 mm NZXT
Included fans—3 × F120Q Airflow case version; 3-pin DC NZXT
Fan speed—1350 ± 150 RPM NZXT
Front connections—2 USB-A; 1 USB-C (USB 3.2 Gen 2x2); 3.5 mm combo jack NZXT
Expansion—7 standard slots; vertical kit separate NZXT
Drive bays—2+2 2.5-inch; 2 3.5-inch NZXT
Fan controller—Not included NZXT
Warranty—2 years on manufacturer page; local terms apply NZXT