Lian Li O11D MINI V2 / NZXT H5 Flow (2024) Black

Lian Li O11D MINI V2: Applies to the standard version without fans: O11DMIV2X (black) and O11DMIV2W (white). The O11D MINI V2 Flow (O11DMIV2FX/FW) with five reverse-blade fans has the same body; the original O11 Dynamic Mini and the O11 Air Mini are separate models.

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

SpecificationLian Li O11D MINI V2NZXT H5 Flow (2024) Black
Release year20252024
Design and materialsDual-chamber case; 2 mm aluminium panel, 1 mm mesh panel, 4.0 mm tempered glass; black (O11DMIV2X) or white (O11DMIV2W)

The front and side glass panels meet at a frameless corner; the power supply and drives sit in a separate chamber behind the motherboard tray. The floor is angled 10° to direct air at the GPU.

Lian Li
—
Motherboard supportATX, Micro-ATX, Mini-ITX; Back-Connect ATX; 5 expansion slots

Back-connect boards take their cables from behind, leaving the front clean; support covers ATX back-connect boards only. If the 24-pin area clashes, Lian Li offers an optional replacement bracket on request. Standoffs can be moved vertically for Micro-ATX boards.

Lian Li
—
Component clearancesGraphics card up to 400 mm; CPU cooler up to 160 mm; ATX power supply up to 200 mm

ATX power supplies up to 200 mm fit thanks to an extended side mesh panel without widening the case; the PSU's power socket must sit at least 12 mm from the edge. With a Micro-ATX board and the GPU in the second slot, cards thicker than 72 mm may hit the bottom fans.

Lian Li
—
Radiator supportTop 240/280/360 mm; side 240 mm

A 280 mm top radiator is supported only with Micro-ATX and Mini-ITX boards mounted one slot lower. The top fan/radiator bracket is removable, so parts can be fitted outside and dropped in with the bracket.

Lian Li
Front up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Fan supportTop 3 x 120 mm or 2 x 140 mm; side 2 x 120 mm; bottom 3 x 120 mm; rear 1 x 120 mm; no fans included (the Flow version has five reverse-blade 120 mm PWM fans)

Unused fan mounts can be closed with tool-less covers to steer airflow.

Lian Li
—
StorageDrive cage: 2 x 2.5-inch SSD or 2 x 3.5-inch HDD; behind the motherboard tray: 2 x 2.5-inch SSD

When unused, the drive cages double as cable storage.

Lian Li
—
Front panel2 x USB 3.0, 1 x USB 3.2 Type-C, audio, power button; can be placed at the top or bottom

When the I/O module is moved to the top, the lower module and its cover can be removed to improve bottom intake. The Type-C port's speed is not stated in the table.

Lian Li
—
GPU supportHorizontal and vertical GPU anti-sag brackets; height-adjustable vertical GPU bracket

They are meant to stop heavy graphics cards sagging in the slot; the vertical bracket adjusts in height for thick cards.

Lian Li
—
Size, dust filter and warranty423.6 x 273.3 x 391.95 mm (D x W x H); 1 bottom dust filter; 1-year warranty Lian Li—
Form factor—Compact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
Motherboard—E-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
Materials—SGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
Size and weight—465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
Clearances—CPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
Fan mounts—Front 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
Included fans—2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
Front I/O—1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Expansion and drives—7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT
Warranty and model code—2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT