Lian Li O11D MINI V2 / Lian Li Vector V100R

Lian Li O11D MINI V2: Applies to the standard version without fans: O11DMIV2X (black) and O11DMIV2W (white). The O11D MINI V2 Flow (O11DMIV2FX/FW) with five reverse-blade fans has the same body; the original O11 Dynamic Mini and the O11 Air Mini are separate models.

Lian Li Vector V100R: Lian Li Vector V100R (2025), mid-tower case with four pre-installed 120 mm ARGB fans; V100RX black, V100RW white. The fanless V100 (V100X / V100W) has the same chassis.

SpecificationLian Li O11D MINI V2Lian Li Vector V100R
Release year20252025
Design and materialsDual-chamber case; 2 mm aluminium panel, 1 mm mesh panel, 4.0 mm tempered glass; black (O11DMIV2X) or white (O11DMIV2W)

The front and side glass panels meet at a frameless corner; the power supply and drives sit in a separate chamber behind the motherboard tray. The floor is angled 10° to direct air at the GPU.

Lian Li
—
Motherboard supportATX, Micro-ATX, Mini-ITX; Back-Connect ATX; 5 expansion slots

Back-connect boards take their cables from behind, leaving the front clean; support covers ATX back-connect boards only. If the 24-pin area clashes, Lian Li offers an optional replacement bracket on request. Standoffs can be moved vertically for Micro-ATX boards.

Lian Li
ATX, M-ATX, Mini-ITX; back-connect ATX and M-ATX motherboards

On back-connect motherboards the power and data connectors are on the back of the board, so cables are hidden from the front glass. They are a separate type of board; regular motherboards fit too.

Lian Li
Component clearancesGraphics card up to 400 mm; CPU cooler up to 160 mm; ATX power supply up to 200 mm

ATX power supplies up to 200 mm fit thanks to an extended side mesh panel without widening the case; the PSU's power socket must sit at least 12 mm from the edge. With a Micro-ATX board and the GPU in the second slot, cards thicker than 72 mm may hit the bottom fans.

Lian Li
—
Radiator supportTop 240/280/360 mm; side 240 mm

A 280 mm top radiator is supported only with Micro-ATX and Mini-ITX boards mounted one slot lower. The top fan/radiator bracket is removable, so parts can be fitted outside and dropped in with the bracket.

Lian Li
—
Fan supportTop 3 x 120 mm or 2 x 140 mm; side 2 x 120 mm; bottom 3 x 120 mm; rear 1 x 120 mm; no fans included (the Flow version has five reverse-blade 120 mm PWM fans)

Unused fan mounts can be closed with tool-less covers to steer airflow.

Lian Li
—
StorageDrive cage: 2 x 2.5-inch SSD or 2 x 3.5-inch HDD; behind the motherboard tray: 2 x 2.5-inch SSD

When unused, the drive cages double as cable storage.

Lian Li
—
Front panel2 x USB 3.0, 1 x USB 3.2 Type-C, audio, power button; can be placed at the top or bottom

When the I/O module is moved to the top, the lower module and its cover can be removed to improve bottom intake. The Type-C port's speed is not stated in the table.

Lian Li
—
GPU supportHorizontal and vertical GPU anti-sag brackets; height-adjustable vertical GPU bracket

They are meant to stop heavy graphics cards sagging in the slot; the vertical bracket adjusts in height for thick cards.

Lian Li
—
Size, dust filter and warranty423.6 x 273.3 x 391.95 mm (D x W x H); 1 bottom dust filter; 1-year warranty Lian Li—
Type and size—Mid-tower; 446 x 235.5 x 484.65 mm (L x W x H); steel, tempered glass and plastic

Dimensions are length, width and height; plan for 446 mm of depth on the desk. The front and side panels are 4 mm tempered glass, and with no corner pillar the hardware inside is visible over 270 degrees.

Lian Li
Fan support and included fans—Top: 3 x 120 mm or 2 x 140 mm; side: 3 x 120 mm (pre-installed); rear: 1 x 120 mm (pre-installed) or 1 x 140 mm; bottom: 2 x 120 mm; up to 9 fans in total

The V100R version ships with three side and one rear 120 mm ARGB fan installed; the fanless V100 version has none. Lian Li gives the side mesh panel a 40.3% perforation rate.

Lian Li
Radiator and cooler—Up to a 360 mm radiator on top (height under 60 mm); up to 178 mm CPU cooler height

A liquid cooling radiator only fits in the top position; Lian Li limits radiator height to under 60 mm.

Lian Li
Graphics card—Up to 420 mm graphics card length; 7 PCIe expansion slots; pre-installed GB001 GPU support bracket

420 mm fits even the longest high-end graphics cards. The bracket keeps a heavy card from sagging over time and straining the PCIe slot.

Lian Li
Power supply and storage—ATX power supply (under 220 mm); 1 x 2.5-inch SSD behind the tray, 1 x 3.5-inch HDD at the bottom

The power supply sits in the second chamber, where cables are hidden. Drive space is limited: there is only one 2.5-inch and one 3.5-inch bay; M.2 SSDs go on the motherboard.

Lian Li
Front I/O—On the side: 2 x USB 3.0, 1 x USB 3.1 Type-C, 1 x audio, power and reset buttons

The ports sit on the lower side of the case rather than the front. The USB-C port needs a front-panel USB-C header on the motherboard.

Lian Li
Lighting and other—26-LED ARGB light strip (syncs with motherboard software); removable hand rest; bottom dust filter; warranty 1 year for the case, 2 years for the fans

The ARGB strip is controlled with one button or the motherboard's lighting software. Lian Li's table lists a dust filter at the bottom only.

Lian Li
Model numbers—V100RX (black), V100RW (white); fanless version V100X / V100W

The R marks the version with fans; case dimensions and hardware compatibility are the same as the fanless V100.

Lian Li