Lian Li O11 Dynamic EVO RGB / NZXT H6 Flow

Lian Li O11 Dynamic EVO RGB: O11D EVO RGB; Black (O11DERGBX) and White (O11DERGBW). The O11 Dynamic EVO (without RGB strips), O11 Dynamic EVO XL and O11 Vision are separate cases.

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

SpecificationLian Li O11 Dynamic EVO RGBNZXT H6 Flow
Release year20242023
Size and typeTower chassis; 478 × 290 × 471 mm (D × W × H) Lian Li—
Materials4.0 mm tempered glass, aluminium, steel

The front and side glass panels and removable pillar give an uninterrupted view of the components.

Lian Li
—
MotherboardE-ATX (under 280 mm), ATX, Micro-ATX, Mini-ITX; 7 expansion slots

The motherboard can be mounted at two heights, and the case can be flipped for a left or right view.

Lian Li
—
CoolingRadiator: top 240/360/420 mm, side 240/280/360 mm, bottom 240/280/360 mm. Fans: top, side and bottom 3 × 120 or 3 × 140 mm; rear 1 × 120 mm

A 420 mm top radiator needs a separate bracket. There are no screw points for 3 × 140 mm fans at the top and bottom; Lian Li supports only UNI FAN models there, which hold without screws.

Lian Li
—
ClearancesGraphics card up to 455.7 mm; CPU cooler up to 167 mm; ATX power supply up to 220 mm

The included GB-003 GPU anti-sag bracket only works with a card in the second expansion slot.

Lian Li
—
StorageSide fan bracket: 2 × 3.5-inch or 4 × 2.5-inch; behind motherboard tray: 2 × 2.5-inch; drive cage: 2 × 3.5-inch or 2.5-inch Lian Li—
Front I/O2 × USB 3.0; 1 × USB 3.1 Type-C; audio; colour, mode, brightness, reset and power buttons Lian Li2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Lighting1.5 mm L-shaped ARGB strips at the top and bottom; 14 effects; motherboard sync

Holding the mode button for 3 seconds syncs the lighting with motherboard software; holding again cancels it.

Lian Li
—
Dust filter and warranty1 bottom dust filter; 1-year warranty Lian Li—
Case type and materials—Compact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
Size and weight—435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
Motherboard and expansion—ATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Component clearance—Graphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
Fan support—Front-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Radiator support—Up to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Included fans—3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Storage and assembly—2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT