NZXT H5 Flow (2024) Black / Lian Li O11 Vision

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

Lian Li O11 Vision: O11VX (black), O11VW (white) and O11VC (Color Chrome). The O11 Vision Compact (O11VP), O11 Dynamic EVO and O11 Vision M are separate cases with different dimensions.

SpecificationNZXT H5 Flow (2024) BlackLian Li O11 Vision
Release year20242023
Form factorCompact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
—
MaterialsSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
—
Size and weight465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
—
ClearancesCPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
—
Fan mountsFront 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
—
Radiator supportFront up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Side 360/280/240 mm; bottom 360/280/240 mm; rear 240/120 mm; up to 2 × 360 + 1 × 240 mm Lian Li
Included fans2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
—
Front I/O1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Power and reset buttons, 2 × USB 3.0, 1 × USB Type-C, audio jack

The Type-C speed is not stated by the manufacturer; the motherboard needs a matching internal USB-C header.

Lian Li
Expansion and drives7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT—
Warranty and model code2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT—
Case type—Dual-chamber tower case; steel, aluminium and tempered glass

The second chamber separates the power supply and cables from the main chamber, so only the components show behind the glass.

Lian Li
Glass panels—4 mm tempered glass on the front and side, 3 mm on top; three glass sides without corner pillars

The pillarless joint gives an uninterrupted view inside; because the front is glass there is no front intake, so air comes in from the side and bottom.

Lian Li
Dimensions—480 × 304 × 464.5 mm (D × W × H) Lian Li
Motherboard support—E-ATX (under 280 mm), ATX, Micro-ATX, Mini-ITX Lian Li
Component clearance—Graphics card up to 430 mm; CPU cooler up to 174 mm; ATX power supply up to 232 mm

Large triple-slot graphics cards and long power supplies fit; the cooler height suits most large dual-tower air coolers.

Lian Li
Fan positions—Side 3 × 120 or 2 × 140 mm; bottom 3 × 120 or 3 × 140 mm; rear 1–2 × 120 mm; up to 8 fans (11 with push-pull); no fans included

Fans must be bought separately; a typical layout pulls air in from the bottom and side and exhausts at the rear.

Lian Li
Storage—3 × 2.5-inch behind the motherboard tray; cage for 2 × 3.5-inch or 2 × 2.5-inch (5 in total) Lian Li
Expansion and vertical GPU—6+1 expansion slots; optional VG4-5 vertical GPU kit (up to 4-slot cards, with PCIe 5.0 riser cable)

The vertical kit is not in the box; it is bought separately to show the card facing the glass.

Lian Li
Other—Bottom dust filter; 27 mm feet; 1-year warranty Lian Li