Phanteks NV5 MKII / Lian Li O11 Dynamic EVO

Phanteks NV5 MKII: PH-NV523TG_DBK02 · Satin Black · D-RGB · no fans included

Lian Li O11 Dynamic EVO: O11 Dynamic EVO (2021): black O11DEX, white O11DEW and Harbor Grey O11DEG; LED strip on the front, no fans included. The O11D EVO RGB with a mesh RGB front, the larger O11 Dynamic EVO XL and the original O11 Dynamic are separate cases.

SpecificationPhanteks NV5 MKIILian Li O11 Dynamic EVO
Release year20242021
Model codePH-NV523TG_DBK02; D-RGB, Satin Black Phanteks—
Case typeMid-tower; steel chassis, tempered glass Phanteks—
Dimensions239 × 477 × 528 mm

The manufacturer does not state the axis order.

Phanteks
—
WeightNet 11.28 kg; gross 13.97 kg Phanteks—
Motherboard supportE-ATX, ATX, Micro-ATX, Mini-ITX; E-ATX up to 280 mm without the GPU support bracket Phanteks—
Rear-connector motherboardsHidden-connector motherboards supported: ASUS BTF, MSI Project Zero, Gigabyte Project Stealth Phanteks—
Graphics card clearanceLength up to 440 mm

The product page calls the 170 mm figure height; the installation guide calls it width.

Phanteks
—
Vertical GPU mounting3 slots; riser cable sold separately Phanteks—
GPU support bracketOne included in the box Phanteks—
CPU cooler heightUp to 180 mm Phanteks—
Power supplyUp to 230 mm long Phanteks—
Expansion slots7 PCI slots Phanteks—
Fan positionsEight 120 mm in total: 3 top, 3 side, 1 rear, 1 bottom; no 140 mm positions

The manufacturer presents the bottom fan as feeding air directly to the GPU.

Phanteks
—
Included fansNo fans in the scope of delivery

The installation guide’s contents list shows no fans either.

Phanteks
—
Radiator mountsTop and side: up to 360 mm; rear: 120 mm

The top and side positions can hold two 360 mm radiators at once.

Phanteks
—
Storage bays4 × 2.5-inch SSD and 3 × 3.5-inch HDD bays Phanteks—
Front I/O1 × USB-C 3.2 Gen 2, 2 × USB 3.0, microphone/headphone, power button, D-RGB mode and colour buttons

The guide lists a reset button but the product page does not, so it is not stated here.

Phanteks
2 × USB 3.0 Type-A, 1 × USB 3.1 Type-C, audio/mic jack, LED colour and mode button, reset and power buttons; the panel can be moved to 3 positions along the bottom

The front I/O sits on the bottom edge of the case, which can be awkward to reach if the case is on the floor; Lian Li sells a separate top I/O kit for that. The additional I/O kit raises the ports to 4 × USB-A and 2 × USB-C; both USB-C ports need two internal USB-C headers on the motherboard.

Lian Li
LightingBuilt-in D-RGB controller; works without software

An optional Premium D-RGB kit is sold separately.

Phanteks
ARGB LED strip on the front panel; 7 built-in effects, an 8th mode syncs with motherboard software or L-Connect Lian Li
Dust filtrationUltra-fine mesh on the top and side panels Phanteks—
PSU coverRemovable for access to power cables Phanteks—
Warranty5-year limited warranty Phanteks—
Size and type—465 × 285 × 459 mm (D × W × H); dual-chamber mid tower

The case is a wide, low “fish tank” style: behind the motherboard chamber is a second chamber for the power supply and cables. It takes up more width than a typical tower.

Lian Li
Materials—4 mm aluminium, 4 mm tempered glass (front and side), 1 mm steel frame Lian Li
Colours and model codes—Black O11DEX, white O11DEW, Harbor Grey O11DEG Lian Li
Motherboard—E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; 8 expansion slots Lian Li
Fan support—Top 3 × 120 or 2 × 140 mm; side 3 × 120 or 2 × 140 mm; bottom 3 × 120 or 2 × 140 mm; rear 1 × 120 mm; 1 × 60 mm on the drive cage; no fans included

Up to 10 fans fit in total. No fans come in the box, so fans have to be budgeted separately; the 60 mm spot is meant for cooling drives in the second chamber or mounting a fan hub.

Lian Li
Radiator support—Top 360 or 280 mm (87.5 mm max total thickness); side 360 or 280 mm; bottom 360 mm (87.5 mm max total thickness)

Three 360 mm radiators can be fitted at once, which gives plenty of room for custom water loops. The thickness allowed for the side radiator ranges from 63 to 120 mm depending on the top and bottom fan size and bracket orientation.

Lian Li
Clearances—Graphics card up to 426 mm; CPU cooler up to 167 mm; power supply up to 220 mm

426 mm leaves room for even today’s longest graphics cards. The 167 mm CPU cooler limit may rule out some large dual-tower air coolers, so check the cooler’s height before buying.

Lian Li
Storage—Bottom: 4 × 2.5-inch SSD or 2 × 3.5-inch HDD; side: 4 × 2.5-inch or 2 × 3.5-inch; drive cage: 3 × 2.5-inch or 2 × 3.5-inch + 1 × 2.5-inch; cable bar: 2 × 2.5-inch (9 sets of 2.5-inch mounting pads included) Lian Li
Reverse mode and GPU mounting—The case can be flipped to show its insides from the right side; vertical GPU kit (lower or upper position), upright GPU kit and GPU anti-sag bracket; room for a second power supply

Reverse mode turns the interior towards the user when the case sits on the left of the desk. The vertical and upright GPU kits are sold separately; the anti-sag bracket is in the box. Removing the drive cage makes room for a second power supply.

Lian Li
Dust filter and warranty—1 bottom dust filter; 1-year warranty

The warranty period can vary by country and retailer.

Lian Li