NZXT H6 Flow / Lian Li O11 Dynamic EVO

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

Lian Li O11 Dynamic EVO: O11 Dynamic EVO (2021): black O11DEX, white O11DEW and Harbor Grey O11DEG; LED strip on the front, no fans included. The O11D EVO RGB with a mesh RGB front, the larger O11 Dynamic EVO XL and the original O11 Dynamic are separate cases.

SpecificationNZXT H6 FlowLian Li O11 Dynamic EVO
Release year20232021
Case type and materialsCompact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
—
Size and weight435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
—
Motherboard and expansionATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
—
Component clearanceGraphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
—
Fan supportFront-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Top 3 × 120 or 2 × 140 mm; side 3 × 120 or 2 × 140 mm; bottom 3 × 120 or 2 × 140 mm; rear 1 × 120 mm; 1 × 60 mm on the drive cage; no fans included

Up to 10 fans fit in total. No fans come in the box, so fans have to be budgeted separately; the 60 mm spot is meant for cooling drives in the second chamber or mounting a fan hub.

Lian Li
Radiator supportUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Top 360 or 280 mm (87.5 mm max total thickness); side 360 or 280 mm; bottom 360 mm (87.5 mm max total thickness)

Three 360 mm radiators can be fitted at once, which gives plenty of room for custom water loops. The thickness allowed for the side radiator ranges from 63 to 120 mm depending on the top and bottom fan size and bracket orientation.

Lian Li
Included fans3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
—
Front I/O2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
2 × USB 3.0 Type-A, 1 × USB 3.1 Type-C, audio/mic jack, LED colour and mode button, reset and power buttons; the panel can be moved to 3 positions along the bottom

The front I/O sits on the bottom edge of the case, which can be awkward to reach if the case is on the floor; Lian Li sells a separate top I/O kit for that. The additional I/O kit raises the ports to 4 × USB-A and 2 × USB-C; both USB-C ports need two internal USB-C headers on the motherboard.

Lian Li
Storage and assembly2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT
—
Size and type—465 × 285 × 459 mm (D × W × H); dual-chamber mid tower

The case is a wide, low “fish tank” style: behind the motherboard chamber is a second chamber for the power supply and cables. It takes up more width than a typical tower.

Lian Li
Materials—4 mm aluminium, 4 mm tempered glass (front and side), 1 mm steel frame Lian Li
Colours and model codes—Black O11DEX, white O11DEW, Harbor Grey O11DEG Lian Li
Motherboard—E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; 8 expansion slots Lian Li
Clearances—Graphics card up to 426 mm; CPU cooler up to 167 mm; power supply up to 220 mm

426 mm leaves room for even today’s longest graphics cards. The 167 mm CPU cooler limit may rule out some large dual-tower air coolers, so check the cooler’s height before buying.

Lian Li
Storage—Bottom: 4 × 2.5-inch SSD or 2 × 3.5-inch HDD; side: 4 × 2.5-inch or 2 × 3.5-inch; drive cage: 3 × 2.5-inch or 2 × 3.5-inch + 1 × 2.5-inch; cable bar: 2 × 2.5-inch (9 sets of 2.5-inch mounting pads included) Lian Li
Reverse mode and GPU mounting—The case can be flipped to show its insides from the right side; vertical GPU kit (lower or upper position), upright GPU kit and GPU anti-sag bracket; room for a second power supply

Reverse mode turns the interior towards the user when the case sits on the left of the desk. The vertical and upright GPU kits are sold separately; the anti-sag bracket is in the box. Removing the drive cage makes room for a second power supply.

Lian Li
Lighting—ARGB LED strip on the front panel; 7 built-in effects, an 8th mode syncs with motherboard software or L-Connect Lian Li
Dust filter and warranty—1 bottom dust filter; 1-year warranty

The warranty period can vary by country and retailer.

Lian Li