NZXT H5 Flow (2024) Black / Lian Li O11 Dynamic EVO

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

Lian Li O11 Dynamic EVO: O11 Dynamic EVO (2021): black O11DEX, white O11DEW and Harbor Grey O11DEG; LED strip on the front, no fans included. The O11D EVO RGB with a mesh RGB front, the larger O11 Dynamic EVO XL and the original O11 Dynamic are separate cases.

SpecificationNZXT H5 Flow (2024) BlackLian Li O11 Dynamic EVO
Release year20242021
Form factorCompact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; 8 expansion slots Lian Li
MaterialsSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
4 mm aluminium, 4 mm tempered glass (front and side), 1 mm steel frame Lian Li
Size and weight465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
—
ClearancesCPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
Graphics card up to 426 mm; CPU cooler up to 167 mm; power supply up to 220 mm

426 mm leaves room for even today’s longest graphics cards. The 167 mm CPU cooler limit may rule out some large dual-tower air coolers, so check the cooler’s height before buying.

Lian Li
Fan mountsFront 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
—
Radiator supportFront up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Top 360 or 280 mm (87.5 mm max total thickness); side 360 or 280 mm; bottom 360 mm (87.5 mm max total thickness)

Three 360 mm radiators can be fitted at once, which gives plenty of room for custom water loops. The thickness allowed for the side radiator ranges from 63 to 120 mm depending on the top and bottom fan size and bracket orientation.

Lian Li
Included fans2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
—
Front I/O1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
2 × USB 3.0 Type-A, 1 × USB 3.1 Type-C, audio/mic jack, LED colour and mode button, reset and power buttons; the panel can be moved to 3 positions along the bottom

The front I/O sits on the bottom edge of the case, which can be awkward to reach if the case is on the floor; Lian Li sells a separate top I/O kit for that. The additional I/O kit raises the ports to 4 × USB-A and 2 × USB-C; both USB-C ports need two internal USB-C headers on the motherboard.

Lian Li
Expansion and drives7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT—
Warranty and model code2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT—
Size and type—465 × 285 × 459 mm (D × W × H); dual-chamber mid tower

The case is a wide, low “fish tank” style: behind the motherboard chamber is a second chamber for the power supply and cables. It takes up more width than a typical tower.

Lian Li
Colours and model codes—Black O11DEX, white O11DEW, Harbor Grey O11DEG Lian Li
Fan support—Top 3 × 120 or 2 × 140 mm; side 3 × 120 or 2 × 140 mm; bottom 3 × 120 or 2 × 140 mm; rear 1 × 120 mm; 1 × 60 mm on the drive cage; no fans included

Up to 10 fans fit in total. No fans come in the box, so fans have to be budgeted separately; the 60 mm spot is meant for cooling drives in the second chamber or mounting a fan hub.

Lian Li
Storage—Bottom: 4 × 2.5-inch SSD or 2 × 3.5-inch HDD; side: 4 × 2.5-inch or 2 × 3.5-inch; drive cage: 3 × 2.5-inch or 2 × 3.5-inch + 1 × 2.5-inch; cable bar: 2 × 2.5-inch (9 sets of 2.5-inch mounting pads included) Lian Li
Reverse mode and GPU mounting—The case can be flipped to show its insides from the right side; vertical GPU kit (lower or upper position), upright GPU kit and GPU anti-sag bracket; room for a second power supply

Reverse mode turns the interior towards the user when the case sits on the left of the desk. The vertical and upright GPU kits are sold separately; the anti-sag bracket is in the box. Removing the drive cage makes room for a second power supply.

Lian Li
Lighting—ARGB LED strip on the front panel; 7 built-in effects, an 8th mode syncs with motherboard software or L-Connect Lian Li
Dust filter and warranty—1 bottom dust filter; 1-year warranty

The warranty period can vary by country and retailer.

Lian Li