Lian Li O11 Dynamic EVO RGB / Lian Li O11 Dynamic EVO

Lian Li O11 Dynamic EVO RGB: O11D EVO RGB; Black (O11DERGBX) and White (O11DERGBW). The O11 Dynamic EVO (without RGB strips), O11 Dynamic EVO XL and O11 Vision are separate cases.

Lian Li O11 Dynamic EVO: O11 Dynamic EVO (2021): black O11DEX, white O11DEW and Harbor Grey O11DEG; LED strip on the front, no fans included. The O11D EVO RGB with a mesh RGB front, the larger O11 Dynamic EVO XL and the original O11 Dynamic are separate cases.

SpecificationLian Li O11 Dynamic EVO RGBLian Li O11 Dynamic EVO
Release year20242021
Size and typeTower chassis; 478 × 290 × 471 mm (D × W × H) Lian Li465 × 285 × 459 mm (D × W × H); dual-chamber mid tower

The case is a wide, low “fish tank” style: behind the motherboard chamber is a second chamber for the power supply and cables. It takes up more width than a typical tower.

Lian Li
Materials4.0 mm tempered glass, aluminium, steel

The front and side glass panels and removable pillar give an uninterrupted view of the components.

Lian Li
4 mm aluminium, 4 mm tempered glass (front and side), 1 mm steel frame Lian Li
MotherboardE-ATX (under 280 mm), ATX, Micro-ATX, Mini-ITX; 7 expansion slots

The motherboard can be mounted at two heights, and the case can be flipped for a left or right view.

Lian Li
E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; 8 expansion slots Lian Li
CoolingRadiator: top 240/360/420 mm, side 240/280/360 mm, bottom 240/280/360 mm. Fans: top, side and bottom 3 × 120 or 3 × 140 mm; rear 1 × 120 mm

A 420 mm top radiator needs a separate bracket. There are no screw points for 3 × 140 mm fans at the top and bottom; Lian Li supports only UNI FAN models there, which hold without screws.

Lian Li
—
ClearancesGraphics card up to 455.7 mm; CPU cooler up to 167 mm; ATX power supply up to 220 mm

The included GB-003 GPU anti-sag bracket only works with a card in the second expansion slot.

Lian Li
Graphics card up to 426 mm; CPU cooler up to 167 mm; power supply up to 220 mm

426 mm leaves room for even today’s longest graphics cards. The 167 mm CPU cooler limit may rule out some large dual-tower air coolers, so check the cooler’s height before buying.

Lian Li
StorageSide fan bracket: 2 × 3.5-inch or 4 × 2.5-inch; behind motherboard tray: 2 × 2.5-inch; drive cage: 2 × 3.5-inch or 2.5-inch Lian LiBottom: 4 × 2.5-inch SSD or 2 × 3.5-inch HDD; side: 4 × 2.5-inch or 2 × 3.5-inch; drive cage: 3 × 2.5-inch or 2 × 3.5-inch + 1 × 2.5-inch; cable bar: 2 × 2.5-inch (9 sets of 2.5-inch mounting pads included) Lian Li
Front I/O2 × USB 3.0; 1 × USB 3.1 Type-C; audio; colour, mode, brightness, reset and power buttons Lian Li2 × USB 3.0 Type-A, 1 × USB 3.1 Type-C, audio/mic jack, LED colour and mode button, reset and power buttons; the panel can be moved to 3 positions along the bottom

The front I/O sits on the bottom edge of the case, which can be awkward to reach if the case is on the floor; Lian Li sells a separate top I/O kit for that. The additional I/O kit raises the ports to 4 × USB-A and 2 × USB-C; both USB-C ports need two internal USB-C headers on the motherboard.

Lian Li
Lighting1.5 mm L-shaped ARGB strips at the top and bottom; 14 effects; motherboard sync

Holding the mode button for 3 seconds syncs the lighting with motherboard software; holding again cancels it.

Lian Li
ARGB LED strip on the front panel; 7 built-in effects, an 8th mode syncs with motherboard software or L-Connect Lian Li
Dust filter and warranty1 bottom dust filter; 1-year warranty Lian Li1 bottom dust filter; 1-year warranty

The warranty period can vary by country and retailer.

Lian Li
Colours and model codes—Black O11DEX, white O11DEW, Harbor Grey O11DEG Lian Li
Fan support—Top 3 × 120 or 2 × 140 mm; side 3 × 120 or 2 × 140 mm; bottom 3 × 120 or 2 × 140 mm; rear 1 × 120 mm; 1 × 60 mm on the drive cage; no fans included

Up to 10 fans fit in total. No fans come in the box, so fans have to be budgeted separately; the 60 mm spot is meant for cooling drives in the second chamber or mounting a fan hub.

Lian Li
Radiator support—Top 360 or 280 mm (87.5 mm max total thickness); side 360 or 280 mm; bottom 360 mm (87.5 mm max total thickness)

Three 360 mm radiators can be fitted at once, which gives plenty of room for custom water loops. The thickness allowed for the side radiator ranges from 63 to 120 mm depending on the top and bottom fan size and bracket orientation.

Lian Li
Reverse mode and GPU mounting—The case can be flipped to show its insides from the right side; vertical GPU kit (lower or upper position), upright GPU kit and GPU anti-sag bracket; room for a second power supply

Reverse mode turns the interior towards the user when the case sits on the left of the desk. The vertical and upright GPU kits are sold separately; the anti-sag bracket is in the box. Removing the drive cage makes room for a second power supply.

Lian Li