Phanteks NV5 MKII / Lian Li LANCOOL II MESH Performance

Phanteks NV5 MKII: PH-NV523TG_DBK02 · Satin Black · D-RGB · no fans included

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationPhanteks NV5 MKIILian Li LANCOOL II MESH Performance
Release year20242020
Model codePH-NV523TG_DBK02; D-RGB, Satin Black Phanteks—
Case typeMid-tower; steel chassis, tempered glass Phanteks—
Dimensions239 × 477 × 528 mm

The manufacturer does not state the axis order.

Phanteks
478 × 229 × 494 mm (D × W × H) Lian Li
WeightNet 11.28 kg; gross 13.97 kg Phanteks—
Motherboard supportE-ATX, ATX, Micro-ATX, Mini-ITX; E-ATX up to 280 mm without the GPU support bracket Phanteks—
Rear-connector motherboardsHidden-connector motherboards supported: ASUS BTF, MSI Project Zero, Gigabyte Project Stealth Phanteks—
Graphics card clearanceLength up to 440 mm

The product page calls the 170 mm figure height; the installation guide calls it width.

Phanteks
—
Vertical GPU mounting3 slots; riser cable sold separately Phanteks—
GPU support bracketOne included in the box Phanteks—
CPU cooler heightUp to 180 mm Phanteks—
Power supplyUp to 230 mm long Phanteks—
Expansion slots7 PCI slots Phanteks—
Fan positionsEight 120 mm in total: 3 top, 3 side, 1 rear, 1 bottom; no 140 mm positions

The manufacturer presents the bottom fan as feeding air directly to the GPU.

Phanteks
—
Included fansNo fans in the scope of delivery

The installation guide’s contents list shows no fans either.

Phanteks
2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Radiator mountsTop and side: up to 360 mm; rear: 120 mm

The top and side positions can hold two 360 mm radiators at once.

Phanteks
—
Storage bays4 × 2.5-inch SSD and 3 × 3.5-inch HDD bays Phanteks—
Front I/O1 × USB-C 3.2 Gen 2, 2 × USB 3.0, microphone/headphone, power button, D-RGB mode and colour buttons

The guide lists a reset button but the product page does not, so it is not stated here.

Phanteks
2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
LightingBuilt-in D-RGB controller; works without software

An optional Premium D-RGB kit is sold separately.

Phanteks
—
Dust filtrationUltra-fine mesh on the top and side panels Phanteks—
PSU coverRemovable for access to power cables Phanteks—
Warranty5-year limited warranty Phanteks—
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Materials—Steel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Fan support—Front: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Component clearances—Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Dust filters—Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li