NZXT H5 Flow (2024) Black / Lian Li LANCOOL II MESH Performance

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationNZXT H5 Flow (2024) BlackLian Li LANCOOL II MESH Performance
Release year20242020
Form factorCompact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
—
MaterialsSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
Steel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Size and weight465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
—
ClearancesCPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
—
Fan mountsFront 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
—
Radiator supportFront up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
—
Included fans2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Front I/O1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
Expansion and drives7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT—
Warranty and model code2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT—
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Dimensions—478 × 229 × 494 mm (D × W × H) Lian Li
Fan support—Front: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Component clearances—Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Dust filters—Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li