Lian Li Vector V100R / Lian Li LANCOOL II MESH Performance

Lian Li Vector V100R: Lian Li Vector V100R (2025), mid-tower case with four pre-installed 120 mm ARGB fans; V100RX black, V100RW white. The fanless V100 (V100X / V100W) has the same chassis.

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationLian Li Vector V100RLian Li LANCOOL II MESH Performance
Release year20252020
Type and sizeMid-tower; 446 x 235.5 x 484.65 mm (L x W x H); steel, tempered glass and plastic

Dimensions are length, width and height; plan for 446 mm of depth on the desk. The front and side panels are 4 mm tempered glass, and with no corner pillar the hardware inside is visible over 270 degrees.

Lian Li
—
Motherboard supportATX, M-ATX, Mini-ITX; back-connect ATX and M-ATX motherboards

On back-connect motherboards the power and data connectors are on the back of the board, so cables are hidden from the front glass. They are a separate type of board; regular motherboards fit too.

Lian Li
—
Fan support and included fansTop: 3 x 120 mm or 2 x 140 mm; side: 3 x 120 mm (pre-installed); rear: 1 x 120 mm (pre-installed) or 1 x 140 mm; bottom: 2 x 120 mm; up to 9 fans in total

The V100R version ships with three side and one rear 120 mm ARGB fan installed; the fanless V100 version has none. Lian Li gives the side mesh panel a 40.3% perforation rate.

Lian Li
—
Radiator and coolerUp to a 360 mm radiator on top (height under 60 mm); up to 178 mm CPU cooler height

A liquid cooling radiator only fits in the top position; Lian Li limits radiator height to under 60 mm.

Lian Li
—
Graphics cardUp to 420 mm graphics card length; 7 PCIe expansion slots; pre-installed GB001 GPU support bracket

420 mm fits even the longest high-end graphics cards. The bracket keeps a heavy card from sagging over time and straining the PCIe slot.

Lian Li
—
Power supply and storageATX power supply (under 220 mm); 1 x 2.5-inch SSD behind the tray, 1 x 3.5-inch HDD at the bottom

The power supply sits in the second chamber, where cables are hidden. Drive space is limited: there is only one 2.5-inch and one 3.5-inch bay; M.2 SSDs go on the motherboard.

Lian Li
—
Front I/OOn the side: 2 x USB 3.0, 1 x USB 3.1 Type-C, 1 x audio, power and reset buttons

The ports sit on the lower side of the case rather than the front. The USB-C port needs a front-panel USB-C header on the motherboard.

Lian Li
2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
Lighting and other26-LED ARGB light strip (syncs with motherboard software); removable hand rest; bottom dust filter; warranty 1 year for the case, 2 years for the fans

The ARGB strip is controlled with one button or the motherboard's lighting software. Lian Li's table lists a dust filter at the bottom only.

Lian Li
—
Model numbersV100RX (black), V100RW (white); fanless version V100X / V100W

The R marks the version with fans; case dimensions and hardware compatibility are the same as the fanless V100.

Lian Li
—
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Dimensions—478 × 229 × 494 mm (D × W × H) Lian Li
Materials—Steel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Included fans—2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Fan support—Front: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Component clearances—Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Dust filters—Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li