Lian Li O11D MINI V2 / Lian Li LANCOOL II MESH Performance

Lian Li O11D MINI V2: Applies to the standard version without fans: O11DMIV2X (black) and O11DMIV2W (white). The O11D MINI V2 Flow (O11DMIV2FX/FW) with five reverse-blade fans has the same body; the original O11 Dynamic Mini and the O11 Air Mini are separate models.

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationLian Li O11D MINI V2Lian Li LANCOOL II MESH Performance
Release year20252020
Design and materialsDual-chamber case; 2 mm aluminium panel, 1 mm mesh panel, 4.0 mm tempered glass; black (O11DMIV2X) or white (O11DMIV2W)

The front and side glass panels meet at a frameless corner; the power supply and drives sit in a separate chamber behind the motherboard tray. The floor is angled 10° to direct air at the GPU.

Lian Li
—
Motherboard supportATX, Micro-ATX, Mini-ITX; Back-Connect ATX; 5 expansion slots

Back-connect boards take their cables from behind, leaving the front clean; support covers ATX back-connect boards only. If the 24-pin area clashes, Lian Li offers an optional replacement bracket on request. Standoffs can be moved vertically for Micro-ATX boards.

Lian Li
—
Component clearancesGraphics card up to 400 mm; CPU cooler up to 160 mm; ATX power supply up to 200 mm

ATX power supplies up to 200 mm fit thanks to an extended side mesh panel without widening the case; the PSU's power socket must sit at least 12 mm from the edge. With a Micro-ATX board and the GPU in the second slot, cards thicker than 72 mm may hit the bottom fans.

Lian Li
Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Radiator supportTop 240/280/360 mm; side 240 mm

A 280 mm top radiator is supported only with Micro-ATX and Mini-ITX boards mounted one slot lower. The top fan/radiator bracket is removable, so parts can be fitted outside and dropped in with the bracket.

Lian Li
—
Fan supportTop 3 x 120 mm or 2 x 140 mm; side 2 x 120 mm; bottom 3 x 120 mm; rear 1 x 120 mm; no fans included (the Flow version has five reverse-blade 120 mm PWM fans)

Unused fan mounts can be closed with tool-less covers to steer airflow.

Lian Li
Front: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
StorageDrive cage: 2 x 2.5-inch SSD or 2 x 3.5-inch HDD; behind the motherboard tray: 2 x 2.5-inch SSD

When unused, the drive cages double as cable storage.

Lian Li
—
Front panel2 x USB 3.0, 1 x USB 3.2 Type-C, audio, power button; can be placed at the top or bottom

When the I/O module is moved to the top, the lower module and its cover can be removed to improve bottom intake. The Type-C port's speed is not stated in the table.

Lian Li
—
GPU supportHorizontal and vertical GPU anti-sag brackets; height-adjustable vertical GPU bracket

They are meant to stop heavy graphics cards sagging in the slot; the vertical bracket adjusts in height for thick cards.

Lian Li
—
Size, dust filter and warranty423.6 x 273.3 x 391.95 mm (D x W x H); 1 bottom dust filter; 1-year warranty Lian Li—
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Dimensions—478 × 229 × 494 mm (D × W × H) Lian Li
Materials—Steel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Included fans—2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Front I/O—2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
Dust filters—Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li