Lian Li O11 Dynamic EVO / Lian Li LANCOOL II MESH Performance

Lian Li O11 Dynamic EVO: O11 Dynamic EVO (2021): black O11DEX, white O11DEW and Harbor Grey O11DEG; LED strip on the front, no fans included. The O11D EVO RGB with a mesh RGB front, the larger O11 Dynamic EVO XL and the original O11 Dynamic are separate cases.

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationLian Li O11 Dynamic EVOLian Li LANCOOL II MESH Performance
Release year20212020
Size and type465 × 285 × 459 mm (D × W × H); dual-chamber mid tower

The case is a wide, low “fish tank” style: behind the motherboard chamber is a second chamber for the power supply and cables. It takes up more width than a typical tower.

Lian Li
—
Materials4 mm aluminium, 4 mm tempered glass (front and side), 1 mm steel frame Lian LiSteel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Colours and model codesBlack O11DEX, white O11DEW, Harbor Grey O11DEG Lian Li—
MotherboardE-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; 8 expansion slots Lian Li—
Fan supportTop 3 × 120 or 2 × 140 mm; side 3 × 120 or 2 × 140 mm; bottom 3 × 120 or 2 × 140 mm; rear 1 × 120 mm; 1 × 60 mm on the drive cage; no fans included

Up to 10 fans fit in total. No fans come in the box, so fans have to be budgeted separately; the 60 mm spot is meant for cooling drives in the second chamber or mounting a fan hub.

Lian Li
Front: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
Radiator supportTop 360 or 280 mm (87.5 mm max total thickness); side 360 or 280 mm; bottom 360 mm (87.5 mm max total thickness)

Three 360 mm radiators can be fitted at once, which gives plenty of room for custom water loops. The thickness allowed for the side radiator ranges from 63 to 120 mm depending on the top and bottom fan size and bracket orientation.

Lian Li
—
ClearancesGraphics card up to 426 mm; CPU cooler up to 167 mm; power supply up to 220 mm

426 mm leaves room for even today’s longest graphics cards. The 167 mm CPU cooler limit may rule out some large dual-tower air coolers, so check the cooler’s height before buying.

Lian Li
—
StorageBottom: 4 × 2.5-inch SSD or 2 × 3.5-inch HDD; side: 4 × 2.5-inch or 2 × 3.5-inch; drive cage: 3 × 2.5-inch or 2 × 3.5-inch + 1 × 2.5-inch; cable bar: 2 × 2.5-inch (9 sets of 2.5-inch mounting pads included) Lian Li—
Front I/O2 × USB 3.0 Type-A, 1 × USB 3.1 Type-C, audio/mic jack, LED colour and mode button, reset and power buttons; the panel can be moved to 3 positions along the bottom

The front I/O sits on the bottom edge of the case, which can be awkward to reach if the case is on the floor; Lian Li sells a separate top I/O kit for that. The additional I/O kit raises the ports to 4 × USB-A and 2 × USB-C; both USB-C ports need two internal USB-C headers on the motherboard.

Lian Li
2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
Reverse mode and GPU mountingThe case can be flipped to show its insides from the right side; vertical GPU kit (lower or upper position), upright GPU kit and GPU anti-sag bracket; room for a second power supply

Reverse mode turns the interior towards the user when the case sits on the left of the desk. The vertical and upright GPU kits are sold separately; the anti-sag bracket is in the box. Removing the drive cage makes room for a second power supply.

Lian Li
—
LightingARGB LED strip on the front panel; 7 built-in effects, an 8th mode syncs with motherboard software or L-Connect Lian Li—
Dust filter and warranty1 bottom dust filter; 1-year warranty

The warranty period can vary by country and retailer.

Lian Li
—
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Dimensions—478 × 229 × 494 mm (D × W × H) Lian Li
Included fans—2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Component clearances—Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Dust filters—Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li