NZXT H6 Flow / Lian Li LANCOOL 216 RGB

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

Lian Li LANCOOL 216 RGB: LANCOOL 216 RGB, black (216RX). It ships with two 160 mm ARGB front fans and one 140 mm rear fan. The white version and the non-RGB LANCOOL 216 have separate codes; the LANCOOL 215 and 217 are separate cases.

SpecificationNZXT H6 FlowLian Li LANCOOL 216 RGB
Release year20232022
Case type and materialsCompact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
—
Size and weight435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
—
Motherboard and expansionATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
—
Component clearanceGraphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
—
Fan supportFront-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
—
Radiator supportUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
—
Included fans3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Front 2 × 160 mm ARGB PWM (two lighting channels, rim and hub); rear 1 × 140 mm PWM

Large fans can move the same air at lower speeds, so they can run quieter. The fans connect to a SATA-powered hub for 4 fans.

Lian Li
Front I/O2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Power, reset, 2 × USB 3.0, 1 × USB Type-C, audio; relocatable Lian Li
Storage and assembly2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT
—
Size and materials—480.9 (D) × 235 (W) × 491.7 (H) mm; steel and 4 mm tempered glass Lian Li
Motherboard—E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; high and low mounting positions

The low position leaves 63 mm at the top for a radiator and fans; the high position is meant for air cooling.

Lian Li
Fan mounts—Top 3 × 120 / 2 × 140 mm; front 3 × 120 / 2 × 140 / 2 × 160 mm; PSU shroud 2 × 120 / 2 × 140 mm; rear 1 × 120 / 1 × 140 mm; PCIe bracket 1 × 120 mm

The PCIe bracket fan blows air at the graphics card from outside the case. A UNI FAN SL-INF 140 does not fit the rear mount.

Lian Li
Radiators—Front 360 / 280 / 240 mm; top 360 / 280 / 240 mm; bottom 240 mm Lian Li
Clearances—GPU 392 mm; CPU cooler 180.5 mm; ATX PSU up to 220 mm Lian Li
Storage and slots—Cage 2 × 2.5" + 2 × 3.5"; PSU shroud 2 × 2.5"; behind tray 2 × 2.5"; 7 expansion slots

The slot panel rotates for vertical GPU mounting; this needs a PCIe riser cable sold separately.

Lian Li
Optional—ARGB controller module; magnetic dust filter

The ARGB controller is not in the box; lighting is controlled from the motherboard or with the separately sold module.

Lian Li