NZXT H5 Flow (2024) Black / Lian Li LANCOOL 216 RGB

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

Lian Li LANCOOL 216 RGB: LANCOOL 216 RGB, black (216RX). It ships with two 160 mm ARGB front fans and one 140 mm rear fan. The white version and the non-RGB LANCOOL 216 have separate codes; the LANCOOL 215 and 217 are separate cases.

SpecificationNZXT H5 Flow (2024) BlackLian Li LANCOOL 216 RGB
Release year20242022
Form factorCompact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; high and low mounting positions

The low position leaves 63 mm at the top for a radiator and fans; the high position is meant for air cooling.

Lian Li
MaterialsSGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
—
Size and weight465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
—
ClearancesCPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
GPU 392 mm; CPU cooler 180.5 mm; ATX PSU up to 220 mm Lian Li
Fan mountsFront 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
Top 3 × 120 / 2 × 140 mm; front 3 × 120 / 2 × 140 / 2 × 160 mm; PSU shroud 2 × 120 / 2 × 140 mm; rear 1 × 120 / 1 × 140 mm; PCIe bracket 1 × 120 mm

The PCIe bracket fan blows air at the graphics card from outside the case. A UNI FAN SL-INF 140 does not fit the rear mount.

Lian Li
Radiator supportFront up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
—
Included fans2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
Front 2 × 160 mm ARGB PWM (two lighting channels, rim and hub); rear 1 × 140 mm PWM

Large fans can move the same air at lower speeds, so they can run quieter. The fans connect to a SATA-powered hub for 4 fans.

Lian Li
Front I/O1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Power, reset, 2 × USB 3.0, 1 × USB Type-C, audio; relocatable Lian Li
Expansion and drives7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT—
Warranty and model code2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT—
Size and materials—480.9 (D) × 235 (W) × 491.7 (H) mm; steel and 4 mm tempered glass Lian Li
Radiators—Front 360 / 280 / 240 mm; top 360 / 280 / 240 mm; bottom 240 mm Lian Li
Storage and slots—Cage 2 × 2.5" + 2 × 3.5"; PSU shroud 2 × 2.5"; behind tray 2 × 2.5"; 7 expansion slots

The slot panel rotates for vertical GPU mounting; this needs a PCIe riser cable sold separately.

Lian Li
Optional—ARGB controller module; magnetic dust filter

The ARGB controller is not in the box; lighting is controlled from the motherboard or with the separately sold module.

Lian Li