Lian Li Vector V100R / Lian Li LANCOOL 216 RGB

Lian Li Vector V100R: Lian Li Vector V100R (2025), mid-tower case with four pre-installed 120 mm ARGB fans; V100RX black, V100RW white. The fanless V100 (V100X / V100W) has the same chassis.

Lian Li LANCOOL 216 RGB: LANCOOL 216 RGB, black (216RX). It ships with two 160 mm ARGB front fans and one 140 mm rear fan. The white version and the non-RGB LANCOOL 216 have separate codes; the LANCOOL 215 and 217 are separate cases.

SpecificationLian Li Vector V100RLian Li LANCOOL 216 RGB
Release year20252022
Type and sizeMid-tower; 446 x 235.5 x 484.65 mm (L x W x H); steel, tempered glass and plastic

Dimensions are length, width and height; plan for 446 mm of depth on the desk. The front and side panels are 4 mm tempered glass, and with no corner pillar the hardware inside is visible over 270 degrees.

Lian Li
—
Motherboard supportATX, M-ATX, Mini-ITX; back-connect ATX and M-ATX motherboards

On back-connect motherboards the power and data connectors are on the back of the board, so cables are hidden from the front glass. They are a separate type of board; regular motherboards fit too.

Lian Li
—
Fan support and included fansTop: 3 x 120 mm or 2 x 140 mm; side: 3 x 120 mm (pre-installed); rear: 1 x 120 mm (pre-installed) or 1 x 140 mm; bottom: 2 x 120 mm; up to 9 fans in total

The V100R version ships with three side and one rear 120 mm ARGB fan installed; the fanless V100 version has none. Lian Li gives the side mesh panel a 40.3% perforation rate.

Lian Li
—
Radiator and coolerUp to a 360 mm radiator on top (height under 60 mm); up to 178 mm CPU cooler height

A liquid cooling radiator only fits in the top position; Lian Li limits radiator height to under 60 mm.

Lian Li
—
Graphics cardUp to 420 mm graphics card length; 7 PCIe expansion slots; pre-installed GB001 GPU support bracket

420 mm fits even the longest high-end graphics cards. The bracket keeps a heavy card from sagging over time and straining the PCIe slot.

Lian Li
—
Power supply and storageATX power supply (under 220 mm); 1 x 2.5-inch SSD behind the tray, 1 x 3.5-inch HDD at the bottom

The power supply sits in the second chamber, where cables are hidden. Drive space is limited: there is only one 2.5-inch and one 3.5-inch bay; M.2 SSDs go on the motherboard.

Lian Li
—
Front I/OOn the side: 2 x USB 3.0, 1 x USB 3.1 Type-C, 1 x audio, power and reset buttons

The ports sit on the lower side of the case rather than the front. The USB-C port needs a front-panel USB-C header on the motherboard.

Lian Li
Power, reset, 2 × USB 3.0, 1 × USB Type-C, audio; relocatable Lian Li
Lighting and other26-LED ARGB light strip (syncs with motherboard software); removable hand rest; bottom dust filter; warranty 1 year for the case, 2 years for the fans

The ARGB strip is controlled with one button or the motherboard's lighting software. Lian Li's table lists a dust filter at the bottom only.

Lian Li
—
Model numbersV100RX (black), V100RW (white); fanless version V100X / V100W

The R marks the version with fans; case dimensions and hardware compatibility are the same as the fanless V100.

Lian Li
—
Size and materials—480.9 (D) × 235 (W) × 491.7 (H) mm; steel and 4 mm tempered glass Lian Li
Motherboard—E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; high and low mounting positions

The low position leaves 63 mm at the top for a radiator and fans; the high position is meant for air cooling.

Lian Li
Included fans—Front 2 × 160 mm ARGB PWM (two lighting channels, rim and hub); rear 1 × 140 mm PWM

Large fans can move the same air at lower speeds, so they can run quieter. The fans connect to a SATA-powered hub for 4 fans.

Lian Li
Fan mounts—Top 3 × 120 / 2 × 140 mm; front 3 × 120 / 2 × 140 / 2 × 160 mm; PSU shroud 2 × 120 / 2 × 140 mm; rear 1 × 120 / 1 × 140 mm; PCIe bracket 1 × 120 mm

The PCIe bracket fan blows air at the graphics card from outside the case. A UNI FAN SL-INF 140 does not fit the rear mount.

Lian Li
Radiators—Front 360 / 280 / 240 mm; top 360 / 280 / 240 mm; bottom 240 mm Lian Li
Clearances—GPU 392 mm; CPU cooler 180.5 mm; ATX PSU up to 220 mm Lian Li
Storage and slots—Cage 2 × 2.5" + 2 × 3.5"; PSU shroud 2 × 2.5"; behind tray 2 × 2.5"; 7 expansion slots

The slot panel rotates for vertical GPU mounting; this needs a PCIe riser cable sold separately.

Lian Li
Optional—ARGB controller module; magnetic dust filter

The ARGB controller is not in the box; lighting is controlled from the motherboard or with the separately sold module.

Lian Li