Phanteks NV5 MKII / Lian Li LANCOOL 215 (black, 215X)

Phanteks NV5 MKII: PH-NV523TG_DBK02 · Satin Black · D-RGB · no fans included

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationPhanteks NV5 MKIILian Li LANCOOL 215 (black, 215X)
Release year20242020
Model codePH-NV523TG_DBK02; D-RGB, Satin Black Phanteks—
Case typeMid-tower; steel chassis, tempered glass Phanteks—
Dimensions239 × 477 × 528 mm

The manufacturer does not state the axis order.

Phanteks
462 mm depth × 215 mm width × 482 mm height Lian Li
WeightNet 11.28 kg; gross 13.97 kg Phanteks—
Motherboard supportE-ATX, ATX, Micro-ATX, Mini-ITX; E-ATX up to 280 mm without the GPU support bracket PhanteksE-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Rear-connector motherboardsHidden-connector motherboards supported: ASUS BTF, MSI Project Zero, Gigabyte Project Stealth Phanteks—
Graphics card clearanceLength up to 440 mm

The product page calls the 170 mm figure height; the installation guide calls it width.

Phanteks
—
Vertical GPU mounting3 slots; riser cable sold separately Phanteks—
GPU support bracketOne included in the box Phanteks—
CPU cooler heightUp to 180 mm Phanteks—
Power supplyUp to 230 mm long Phanteks—
Expansion slots7 PCI slots Phanteks7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Fan positionsEight 120 mm in total: 3 top, 3 side, 1 rear, 1 bottom; no 140 mm positions

The manufacturer presents the bottom fan as feeding air directly to the GPU.

Phanteks
—
Included fansNo fans in the scope of delivery

The installation guide’s contents list shows no fans either.

Phanteks
Front 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Radiator mountsTop and side: up to 360 mm; rear: 120 mm

The top and side positions can hold two 360 mm radiators at once.

Phanteks
—
Storage bays4 × 2.5-inch SSD and 3 × 3.5-inch HDD bays Phanteks—
Front I/O1 × USB-C 3.2 Gen 2, 2 × USB 3.0, microphone/headphone, power button, D-RGB mode and colour buttons

The guide lists a reset button but the product page does not, so it is not stated here.

Phanteks
Power and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
LightingBuilt-in D-RGB controller; works without software

An optional Premium D-RGB kit is sold separately.

Phanteks
—
Dust filtrationUltra-fine mesh on the top and side panels Phanteks—
PSU coverRemovable for access to power cables Phanteks—
Warranty5-year limited warranty Phanteks—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Materials—Steel; 4.0 mm tempered glass side panel Lian Li
Fan support—Front (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator support—Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Clearances—Graphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Storage—2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li