NZXT H7 Flow (2024) / Lian Li LANCOOL 215 (black, 215X)

NZXT H7 Flow (2024): CM-H72FB-01; black, non-RGB version

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationNZXT H7 Flow (2024)Lian Li LANCOOL 215 (black, 215X)
Release year20242020
Form factorMid-tower NZXT—
MotherboardE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX NZXT—
Back-connect motherboardNot supported NZXT—
MaterialsSGCC steel; dark tinted tempered glass NZXTSteel; 4.0 mm tempered glass side panel Lian Li
Dimensions544 × 244 × 468 mm; with feet NZXT462 mm depth × 215 mm width × 482 mm height Lian Li
CPU coolerUp to 185 mm NZXT—
GPU lengthUp to 410 mm NZXT—
Power supplyATX; up to 200 mm NZXT—
Cable clearanceUp to 34.5 mm NZXT—
Top radiatorUp to 360 mm or 280 mm NZXT—
Top thickness limit57 mm combined radiator and fan thickness for 140/280 mm radiators NZXT—
Front radiatorUp to 360 mm or 420 mm NZXT—
Rear radiator120 or 140 mm NZXT—
Front fans3 × 120 or 3 × 140 mm NZXT—
Top fans3 × 120 or 2 × 140 mm NZXT—
Bottom fans3 × 120 mm NZXT—
Rear fan1 × 120 or 140 mm NZXT—
Included fans3 × F120Q Airflow case version; 3-pin DC NZXTFront 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Fan speed1350 ± 150 RPM NZXT—
Front connections2 USB-A; 1 USB-C (USB 3.2 Gen 2x2); 3.5 mm combo jack NZXT—
Expansion7 standard slots; vertical kit separate NZXT—
Drive bays2+2 2.5-inch; 2 3.5-inch NZXT—
Fan controllerNot included NZXT—
Warranty2 years on manufacturer page; local terms apply NZXT—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Motherboard support—E-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Fan support—Front (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator support—Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Clearances—Graphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Storage—2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Expansion slots—7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Front I/O—Power and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li