NZXT H6 Flow / Lian Li LANCOOL 215 (black, 215X)

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationNZXT H6 FlowLian Li LANCOOL 215 (black, 215X)
Release year20232020
Case type and materialsCompact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
—
Size and weight435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
—
Motherboard and expansionATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
—
Component clearanceGraphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
—
Fan supportFront-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Front (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator supportUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Included fans3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Front 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Front I/O2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Power and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
Storage and assembly2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT
—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Dimensions—462 mm depth × 215 mm width × 482 mm height Lian Li
Materials—Steel; 4.0 mm tempered glass side panel Lian Li
Motherboard support—E-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Clearances—Graphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Storage—2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Expansion slots—7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li