Lian Li LANCOOL 215 (black, 215X) / Lian Li LANCOOL II MESH Performance

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationLian Li LANCOOL 215 (black, 215X)Lian Li LANCOOL II MESH Performance
Release year20202020
Models and colourLANCOOL 215X (black), LANCOOL 215W (white) Lian Li—
Dimensions462 mm depth × 215 mm width × 482 mm height Lian Li478 × 229 × 494 mm (D × W × H) Lian Li
MaterialsSteel; 4.0 mm tempered glass side panel Lian LiSteel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Motherboard supportE-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
—
Included fansFront 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Fan supportFront (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian LiFront: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
Radiator supportFront: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
—
ClearancesGraphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li—
Storage2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
—
Expansion slots7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
—
Front I/OPower and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
Fan and lighting hubPre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li—
Cable management22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li—
Dust filtersMagnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li
Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Component clearances—Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li