Lian Li LANCOOL 216 RGB / Lian Li LANCOOL 215 (black, 215X)

Lian Li LANCOOL 216 RGB: LANCOOL 216 RGB, black (216RX). It ships with two 160 mm ARGB front fans and one 140 mm rear fan. The white version and the non-RGB LANCOOL 216 have separate codes; the LANCOOL 215 and 217 are separate cases.

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationLian Li LANCOOL 216 RGBLian Li LANCOOL 215 (black, 215X)
Release year20222020
Size and materials480.9 (D) × 235 (W) × 491.7 (H) mm; steel and 4 mm tempered glass Lian Li—
MotherboardE-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX; high and low mounting positions

The low position leaves 63 mm at the top for a radiator and fans; the high position is meant for air cooling.

Lian Li
—
Included fansFront 2 × 160 mm ARGB PWM (two lighting channels, rim and hub); rear 1 × 140 mm PWM

Large fans can move the same air at lower speeds, so they can run quieter. The fans connect to a SATA-powered hub for 4 fans.

Lian Li
Front 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Fan mountsTop 3 × 120 / 2 × 140 mm; front 3 × 120 / 2 × 140 / 2 × 160 mm; PSU shroud 2 × 120 / 2 × 140 mm; rear 1 × 120 / 1 × 140 mm; PCIe bracket 1 × 120 mm

The PCIe bracket fan blows air at the graphics card from outside the case. A UNI FAN SL-INF 140 does not fit the rear mount.

Lian Li
—
RadiatorsFront 360 / 280 / 240 mm; top 360 / 280 / 240 mm; bottom 240 mm Lian Li—
ClearancesGPU 392 mm; CPU cooler 180.5 mm; ATX PSU up to 220 mm Lian LiGraphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Storage and slotsCage 2 × 2.5" + 2 × 3.5"; PSU shroud 2 × 2.5"; behind tray 2 × 2.5"; 7 expansion slots

The slot panel rotates for vertical GPU mounting; this needs a PCIe riser cable sold separately.

Lian Li
—
Front I/OPower, reset, 2 × USB 3.0, 1 × USB Type-C, audio; relocatable Lian LiPower and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
OptionalARGB controller module; magnetic dust filter

The ARGB controller is not in the box; lighting is controlled from the motherboard or with the separately sold module.

Lian Li
—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Dimensions—462 mm depth × 215 mm width × 482 mm height Lian Li
Materials—Steel; 4.0 mm tempered glass side panel Lian Li
Motherboard support—E-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Fan support—Front (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator support—Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Storage—2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Expansion slots—7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li