Lian Li LANCOOL 207 / NZXT H5 Flow (2024) Black

Lian Li LANCOOL 207: LAN207RX black and LAN207RW white; four-fan ATX mid tower. The LANCOOL 207 Digital with a screen and the LANCOOL 216/217 are separate models.

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

SpecificationLian Li LANCOOL 207NZXT H5 Flow (2024) Black
Release year20242024
Type and motherboardATX mid tower; ATX (up to 244 mm wide), Micro-ATX, Mini-ITX; 7 expansion slots

E-ATX is not supported.

Lian Li
—
Size and materials455.6 × 219 × 456 mm (D × W × H); 45.5 litres; steel body, 4 mm tempered glass Lian Li—
Included fansFront 2 × 140 mm ARGB (450–1900 RPM); above the PSU shroud 2 × 120 mm PWM (500–1950 RPM)

The bottom 120 mm fans blow air straight at the graphics card. Sixteen 28 mm long screws for 25 mm thick fans are included; fans wider than 140 mm are not supported at the front.

Lian Li
2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
Fan and radiator supportFront 2 × 140 mm; top 3 × 120 mm or 2 × 140 mm; above PSU shroud 2 × 120 mm; rear 1 × 120 mm; top 360/280/240 mm radiator

Radiators are supported only at the top; push-pull is possible at 360 mm.

Lian Li
—
ClearancesGPU up to 375 mm; CPU cooler up to 180 mm

The adjustable anti-sag bracket covers 285–315, 316–345 and 346–375 mm card lengths.

Lian Li
CPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
Power supplyATX, shorter than 160 mm; front-mounted with connectors facing out

Rear power input is provided by an extension cable. Fan-up mounting needs specific screw holes; it is incompatible with RS-type rear-connector PSUs. A downward-facing PSU typically needs a CPU cable of about 600 mm.

Lian Li
—
Storage2 × 3.5" HDD or 2.5" SSD Lian Li—
Top I/O2 × USB 3.0; 1 × USB 3.2 Type-C; audio jack; power button

There is no reset button.

Lian Li
—
Filters and accessoriesBottom dust filter; optional front filter (LAN207-1X/1W) and vertical GPU kit (VG4-4-V2X/V2W) Lian Li—
Warranty1 year Lian Li—
Form factor—Compact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
Motherboard—E-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
Materials—SGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
Size and weight—465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
Fan mounts—Front 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
Radiator support—Front up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Front I/O—1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Expansion and drives—7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT
Warranty and model code—2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT