Lian Li LANCOOL 207 / Lian Li LANCOOL II MESH Performance

Lian Li LANCOOL 207: LAN207RX black and LAN207RW white; four-fan ATX mid tower. The LANCOOL 207 Digital with a screen and the LANCOOL 216/217 are separate models.

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationLian Li LANCOOL 207Lian Li LANCOOL II MESH Performance
Release year20242020
Type and motherboardATX mid tower; ATX (up to 244 mm wide), Micro-ATX, Mini-ITX; 7 expansion slots

E-ATX is not supported.

Lian Li		—
Size and materials455.6 × 219 × 456 mm (D × W × H); 45.5 litres; steel body, 4 mm tempered glass Lian Li—
Included fansFront 2 × 140 mm ARGB (450–1900 RPM); above the PSU shroud 2 × 120 mm PWM (500–1950 RPM)

The bottom 120 mm fans blow air straight at the graphics card. Sixteen 28 mm long screws for 25 mm thick fans are included; fans wider than 140 mm are not supported at the front.

Lian Li		2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Fan and radiator supportFront 2 × 140 mm; top 3 × 120 mm or 2 × 140 mm; above PSU shroud 2 × 120 mm; rear 1 × 120 mm; top 360/280/240 mm radiator

Radiators are supported only at the top; push-pull is possible at 360 mm.

Lian Li		—
ClearancesGPU up to 375 mm; CPU cooler up to 180 mm

The adjustable anti-sag bracket covers 285–315, 316–345 and 346–375 mm card lengths.

Lian Li		—
Power supplyATX, shorter than 160 mm; front-mounted with connectors facing out

Rear power input is provided by an extension cable. Fan-up mounting needs specific screw holes; it is incompatible with RS-type rear-connector PSUs. A downward-facing PSU typically needs a CPU cable of about 600 mm.

Lian Li		—
Storage2 × 3.5" HDD or 2.5" SSD Lian Li—
Top I/O2 × USB 3.0; 1 × USB 3.2 Type-C; audio jack; power button

There is no reset button.

Lian Li		—
Filters and accessoriesBottom dust filter; optional front filter (LAN207-1X/1W) and vertical GPU kit (VG4-4-V2X/V2W) Lian Li—
Warranty1 year Lian Li—
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Dimensions—478 × 229 × 494 mm (D × W × H) Lian Li
Materials—Steel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Fan support—Front: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Component clearances—Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Front I/O—2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
Dust filters—Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li