Lian Li LANCOOL 207 / Lian Li LANCOOL 215 (black, 215X)

Lian Li LANCOOL 207: LAN207RX black and LAN207RW white; four-fan ATX mid tower. The LANCOOL 207 Digital with a screen and the LANCOOL 216/217 are separate models.

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationLian Li LANCOOL 207Lian Li LANCOOL 215 (black, 215X)
Release year20242020
Type and motherboardATX mid tower; ATX (up to 244 mm wide), Micro-ATX, Mini-ITX; 7 expansion slots

E-ATX is not supported.

Lian Li
—
Size and materials455.6 × 219 × 456 mm (D × W × H); 45.5 litres; steel body, 4 mm tempered glass Lian Li—
Included fansFront 2 × 140 mm ARGB (450–1900 RPM); above the PSU shroud 2 × 120 mm PWM (500–1950 RPM)

The bottom 120 mm fans blow air straight at the graphics card. Sixteen 28 mm long screws for 25 mm thick fans are included; fans wider than 140 mm are not supported at the front.

Lian Li
Front 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Fan and radiator supportFront 2 × 140 mm; top 3 × 120 mm or 2 × 140 mm; above PSU shroud 2 × 120 mm; rear 1 × 120 mm; top 360/280/240 mm radiator

Radiators are supported only at the top; push-pull is possible at 360 mm.

Lian Li
—
ClearancesGPU up to 375 mm; CPU cooler up to 180 mm

The adjustable anti-sag bracket covers 285–315, 316–345 and 346–375 mm card lengths.

Lian Li
Graphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Power supplyATX, shorter than 160 mm; front-mounted with connectors facing out

Rear power input is provided by an extension cable. Fan-up mounting needs specific screw holes; it is incompatible with RS-type rear-connector PSUs. A downward-facing PSU typically needs a CPU cable of about 600 mm.

Lian Li
—
Storage2 × 3.5" HDD or 2.5" SSD Lian Li2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Top I/O2 × USB 3.0; 1 × USB 3.2 Type-C; audio jack; power button

There is no reset button.

Lian Li
—
Filters and accessoriesBottom dust filter; optional front filter (LAN207-1X/1W) and vertical GPU kit (VG4-4-V2X/V2W) Lian Li—
Warranty1 year Lian Li—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Dimensions—462 mm depth × 215 mm width × 482 mm height Lian Li
Materials—Steel; 4.0 mm tempered glass side panel Lian Li
Motherboard support—E-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Fan support—Front (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator support—Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Expansion slots—7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Front I/O—Power and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li