Fractal Design Pop 2 Vision RGB / NZXT H6 Flow

Fractal Design Pop 2 Vision RGB: FD-C-POV2A-02; Black RGB; empty chassis

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

SpecificationFractal Design Pop 2 Vision RGBNZXT H6 Flow
Release year20262023
Release year2026 Fractal Design—
LayoutDual chamber; tempered-glass front and left side Fractal Design—
MotherboardATX, micro-ATX, Mini-ITX Fractal Design—
Rear-connector motherboardATX support Fractal Design—
GPU lengthUp to 412 mm Fractal Design—
CPU cooler heightUp to 172 mm Fractal Design—
Power supplyATX; up to 190 mm Fractal Design—
Included fans4 × 120 mm Aspect 12X Reverse RGB Fractal Design3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Fan connection3-pin DC; not PWM Fractal Design—
Lighting connection3-pin 5 V ARGB; case controller or motherboard Fractal Design—
Top fans3 × 120 or 2 × 140 mm Fractal Design—
Side / bottom / rear fans2 × 120 / 2 × 120 / 1 × 120 mm Fractal Design—
RadiatorsUp to 360 mm top / 120 mm rear Fractal Design—
Drive positions3 dedicated 2.5-inch; 1 × 3.5-inch Fractal Design—
Expansion slots7 Fractal Design—
Front USB1 USB-A + 1 USB-C; both 5 Gbps Fractal Design—
Audio / controlsCombo audio jack; power and two RGB buttons Fractal Design—
Cable spaceUp to 93 mm Fractal Design—
Net weight9.7 kg Fractal Design—
Case type and materials—Compact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
Size and weight—435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
Motherboard and expansion—ATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Component clearance—Graphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
Fan support—Front-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Radiator support—Up to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Front I/O—2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Storage and assembly—2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT