Fractal Design Pop 2 Vision RGB / NZXT H5 Flow (2024) Black

Fractal Design Pop 2 Vision RGB: FD-C-POV2A-02; Black RGB; empty chassis

NZXT H5 Flow (2024) Black: NZXT H5 Flow (2024) CC-H52FB-01; black, non-RGB version. The white CC-H52FW-01 shares the chassis; the H5 Flow RGB and the 2022 H5 Flow (CC-H51) are separate products.

SpecificationFractal Design Pop 2 Vision RGBNZXT H5 Flow (2024) Black
Release year20262024
Release year2026 Fractal Design—
LayoutDual chamber; tempered-glass front and left side Fractal Design—
MotherboardATX, micro-ATX, Mini-ITX Fractal DesignE-ATX (up to 277 mm), ATX, Micro-ATX, Mini-ITX; back-connect motherboards not supported

The rear cutouts needed for back-connect boards (such as ASUS BTF and MSI Project Zero) are missing; NZXT points to the H6 or H9 Flow for those boards.

NZXT
Rear-connector motherboardATX support Fractal Design—
GPU lengthUp to 412 mm Fractal Design—
CPU cooler heightUp to 172 mm Fractal Design—
Power supplyATX; up to 190 mm Fractal Design—
Included fans4 × 120 mm Aspect 12X Reverse RGB Fractal Design2 x F120Q (Case Version), one front and one rear; 1350 +/- 150 RPM; 60.2 CFM; 1.05 mmH2O; 24.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which is coarser than 4-pin PWM control. Tom's Hardware wrote that the fans stayed below 36.4 dBA, the lowest level its meter can measure.

NZXT
Fan connection3-pin DC; not PWM Fractal Design—
Lighting connection3-pin 5 V ARGB; case controller or motherboard Fractal Design—
Top fans3 × 120 or 2 × 140 mm Fractal Design—
Side / bottom / rear fans2 × 120 / 2 × 120 / 1 × 120 mm Fractal Design—
RadiatorsUp to 360 mm top / 120 mm rear Fractal Design—
Drive positions3 dedicated 2.5-inch; 1 × 3.5-inch Fractal Design—
Expansion slots7 Fractal Design—
Front USB1 USB-A + 1 USB-C; both 5 Gbps Fractal Design—
Audio / controlsCombo audio jack; power and two RGB buttons Fractal Design—
Cable spaceUp to 93 mm Fractal Design—
Net weight9.7 kg Fractal Design—
Form factor—Compact ATX mid-tower; 45.0 litres; ATX power supply

A mid-tower is the mid-size case class that takes standard ATX motherboards and graphics cards. The 2024 version is a different case from the 2022 H5 Flow (CC-H51): the bottom is now mesh and two flat bottom fan mounts replace the angled bottom fan.

NZXT
Materials—SGCC steel; dark tinted tempered glass side panel (black); fine mesh on the front, top and side panels

SGCC is the standard code for galvanised cold-rolled steel sheet. NZXT says the mesh filters dust; Tom's Hardware wrote that the front and top mesh has no separate dust filter.

NZXT
Size and weight—465 x 225 x 430 mm (H x W x D); 7.28 kg

The RGB version (H5 Flow RGB) is the same chassis with different fans and weighs 7.63 kg.

NZXT
Clearances—CPU cooler up to 170 mm; graphics card up to 410 mm; power supply up to 200 mm; cable routing space up to 28.7 mm

These are the values on NZXT's current page; the table in Tom's Hardware's August 2024 review listed 175 mm for the cooler and 425 mm for the graphics card.

NZXT
Fan mounts—Front 3 x 120 mm / 2 x 140 mm; top 2 x 120 mm / 2 x 140 mm; bottom 2 x 120 mm; rear 1 x 120 mm; 8 mounts in total

The bottom fans blow air straight at the graphics card through the perforated power supply shroud; bottom fans are not included.

NZXT
Radiator support—Front up to 360 mm (280 mm on a 140 mm base); top up to 240 mm (280 mm with low-profile memory only); no rear radiator; top radiator plus fan thickness up to 55 mm

The 55 mm top limit is the combined radiator and fan thickness and can clash with tall memory modules.

NZXT
Front I/O—1 x USB 3.2 Type-A; 1 x USB 3.2 Gen 2x2 Type-C (20 Gbps); 1 x headset jack

The Type-C port needs a front-panel USB Type-C (Type-E) header on the motherboard; on older boards without this header the front Type-C will not work.

NZXT
Expansion and drives—7 expansion slots; 2 x 2.5-inch; 1 x 3.5-inch NZXT
Warranty and model code—2 years; CC-H52FB-01 (black) / CC-H52FW-01 (white) NZXT