Fractal Design Pop 2 Vision RGB / Lian Li LANCOOL 215 (black, 215X)

Fractal Design Pop 2 Vision RGB: FD-C-POV2A-02; Black RGB; empty chassis

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationFractal Design Pop 2 Vision RGBLian Li LANCOOL 215 (black, 215X)
Release year20262020
Release year2026 Fractal Design—
LayoutDual chamber; tempered-glass front and left side Fractal Design—
MotherboardATX, micro-ATX, Mini-ITX Fractal Design—
Rear-connector motherboardATX support Fractal Design—
GPU lengthUp to 412 mm Fractal Design—
CPU cooler heightUp to 172 mm Fractal Design—
Power supplyATX; up to 190 mm Fractal Design—
Included fans4 × 120 mm Aspect 12X Reverse RGB Fractal DesignFront 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Fan connection3-pin DC; not PWM Fractal Design—
Lighting connection3-pin 5 V ARGB; case controller or motherboard Fractal Design—
Top fans3 × 120 or 2 × 140 mm Fractal Design—
Side / bottom / rear fans2 × 120 / 2 × 120 / 1 × 120 mm Fractal Design—
RadiatorsUp to 360 mm top / 120 mm rear Fractal Design—
Drive positions3 dedicated 2.5-inch; 1 × 3.5-inch Fractal Design—
Expansion slots7 Fractal Design7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Front USB1 USB-A + 1 USB-C; both 5 Gbps Fractal Design—
Audio / controlsCombo audio jack; power and two RGB buttons Fractal Design—
Cable spaceUp to 93 mm Fractal Design—
Net weight9.7 kg Fractal Design—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Dimensions—462 mm depth × 215 mm width × 482 mm height Lian Li
Materials—Steel; 4.0 mm tempered glass side panel Lian Li
Motherboard support—E-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Fan support—Front (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator support—Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Clearances—Graphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Storage—2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Front I/O—Power and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li