Fractal Design North XL Mesh / NZXT H6 Flow

Fractal Design North XL Mesh: North XL · Mesh side panel

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

SpecificationFractal Design North XL MeshNZXT H6 Flow
Release year20242023
Motherboard supportE-ATX / ATX / Micro ATX / Mini ITX Fractal Design—
Size / volume503 × 240 × 509 mm; 57.62 L Fractal Design—
Weight9.7 kg net Fractal Design—
PanelsReal wood front; ventilated mesh left side; steel right side

The tempered-glass TG and rear-connector RC versions are separate models.

Fractal Design
—
Graphics card clearance413 mm; 380 mm with a front radiator Fractal Design—
CPU cooler clearance185 mm; 155 mm with the fan bracket Fractal Design—
Power supplyATX; up to 290 mm Fractal Design—
Fan mountsFront 3 × 120/140 mm; top 3 × 120, 2 × 140 or 2 × 180 mm; side 2 × 120/140 mm; rear 1 × 120/140 mm Fractal Design—
Radiator supportFront: up to 420 mm; top: up to 360 mm; rear: 120/140 mm Fractal DesignUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Included fans3 × Aspect 14 PWM Fractal Design3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Drive bays2 × 2.5-inch; 2 × combined 3.5/2.5-inch Fractal Design—
Expansion slots7 Fractal Design—
Front I/O1 × USB-C 3.2 Gen 2×2 (20 Gbit/s); 2 × USB-A 5 Gbit/s; headphone and microphone jacks

The motherboard needs a Gen 2×2 front-panel header to use the full USB-C speed.

Fractal Design
2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
Dust filters and cablingFront and PSU filters; 29 mm cable routing space Fractal Design—
Warranty2 years Fractal Design—
Case type and materials—Compact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
Size and weight—435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
Motherboard and expansion—ATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Component clearance—Graphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
Fan support—Front-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Storage and assembly—2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT