Fractal Design Pop Air RGB Black TG Clear Tint / Lian Li LANCOOL II MESH Performance

Fractal Design Pop Air RGB Black TG Clear Tint: Applies to the Pop Air RGB Black TG Clear Tint (FD-C-POR1A-06). The non-RGB Pop Air uses the same chassis with non-RGB fans; the RGB Cyan, Magenta, Green and Orange Core versions differ in interior colour; Pop Mini Air and Pop XL Air are different sizes.

Lian Li LANCOOL II MESH Performance: LANCOOL II MESH Performance (black; the Performance-X version adds USB-C). The LANCOOL II MESH RGB with RGB fans, the white colour and the glass-front LANCOOL II are separate versions; the LANCOOL III and 216 are different cases.

SpecificationFractal Design Pop Air RGB Black TG Clear TintLian Li LANCOOL II MESH Performance
Release year20222020
Type and motherboard supportMid-tower (44 L); ATX, Micro ATX, Mini ITX; 7 expansion slots

ATX is the most common case size. The expansion slots are bridgeless, so a graphics card can be mounted vertically with a separately sold riser.

Fractal Design
—
Component clearanceGraphics card up to 405 mm; CPU cooler up to 170 mm; ATX power supply up to 170 mm

405 mm is enough for the longest triple-fan graphics cards. A 170 mm cooler height covers most large tower coolers. The power supply is hidden in a separate compartment.

Fractal Design
—
Fans3 × Aspect 12 RGB included (2 front, 1 rear); front 2 × 120/140 mm, top 2 × 120/140 mm, rear 1 × 120 mm

There are five fan positions in total. The RGB version's fans can be daisy-chained, so power and lighting can run from two motherboard headers. The case has a built-in ARGB controller and a power button lit in the same colour as the fans.

Fractal Design
—
Radiator supportFront 120/240/280 mm; top 120/240 mm; rear 120 mm

A 360 mm radiator does not fit. Offset mounting positions are used to keep a top 240 mm radiator clear of motherboard components.

Fractal Design
—
Storage2 × 5.25-inch bays (magnetic cover, storage drawer); 3 × combined 3.5/2.5-inch mounts; 2 × dedicated 2.5-inch mounts

The hidden 5.25-inch bays are a rare option for people who want an optical drive; otherwise they serve as a storage drawer. The drive trays hold a 3.5-inch and a 2.5-inch drive at the same time.

Fractal Design
—
Front I/O2 × USB Type-A 5 Gbps; headphone and microphone jacks; power and RGB buttons; USB-C ready (cable sold separately)

The USB-C port position is prepared, but Fractal's separately sold USB-C cable is needed for it to work. There is no reset button.

Fractal Design
2 × USB 3.0; 1 × USB 3.1 Type-C; TRRS audio jack; fan speed button

The USB-C port is on the Performance-X version; other versions add it with a separately sold kit.

Lian Li
Panels, filters and cable managementLeft tempered glass side panel (clear tint); right steel panel; front, top and PSU dust filters; 19 mm cable space behind the motherboard; hook-and-loop straps

Side panels are held by tabs and captive thumbscrews. 19 mm of cable space is moderate; thick power supply cables need careful routing.

Fractal Design
—
Size and weight473.5 × 215 × 454 mm (L × W × H); 7.2 kg net; 2-year warranty Fractal Design—
Case type and motherboard—Mid-tower; E-ATX (under 280 mm wide), ATX, Micro-ATX, Mini-ITX Lian Li
Dimensions—478 × 229 × 494 mm (D × W × H) Lian Li
Materials—Steel; 4 mm tempered glass on both sides

The glass panels and PSU covers are hinged doors that close with magnets; the cable-side glass comes with covers that hide the cables.

Lian Li
Included fans—2 × 140 mm PWM at the front (600–1200 rpm, 60.56 CFM, 25.8 dB(A)); 1 × 120 mm PWM at the rear (600–1500 rpm, 54.6 CFM, 26.1 dB(A))

PWM fans are 4-pin fans whose speed can be controlled by the motherboard or the case controller.

Lian Li
Fan support—Front: 2 × 140 mm or 3 × 120 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm

The built-in hub supports up to six 3- or 4-pin fans; the four-mode button selects fan speed.

Lian Li
Radiator—Front (multi-way bracket): 360/280/240 mm; top: 240 mm (aligned to the left)

The multi-way bracket places a radiator closer to the motherboard or the front panel; Lian Li warns not to mount a 140/280 mm radiator on the inner side of the bracket.

Lian Li
Component clearances—Graphics card 384 mm; CPU cooler 176 mm; PSU 210 mm; 7 expansion slots Lian Li
Drive bays—3 × 3.5″/2.5″ in the cage; 2 × 2.5″ behind the motherboard tray; 2 × 2.5″ behind the right flip panel; 2 × 2.5″ above the PSU chamber

There is room for up to 9 drives; the drive cage slides on a rail without tools.

Lian Li
Dust filters—Magnetic top filter, tray-type bottom filter

No separate dust filter is listed for the mesh front panel.

Lian Li
Optional kits—Vertical GPU kit (PCIe 3.0 riser); hot-swappable back plate; anti-sag GPU bracket

When using the PCIe 3.0 riser with a PCIe 4.0 motherboard and graphics card, the slot must be set to Gen 3 in the BIOS.

Lian Li