Corsair FRAME 4000X RS / NZXT H6 Flow

Corsair FRAME 4000X RS: CC-9011302-WW · black · standard RS120 fans

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

SpecificationCorsair FRAME 4000X RSNZXT H6 Flow
Release year20262023
Announcement and availability7 April 2026; immediately available at announcement Corsair—
Case typeMid-tower; steel, tempered glass, plastic Corsair—
Motherboard supportMini-ITX, Micro-ATX, ATX; E-ATX up to 305 × 277 mm Corsair—
Back-connect motherboard supportSupported Corsair—
Graphics card clearance405 mm with 25 mm front fans; nominal 430 mm without front fans Corsair—
CPU cooler heightUp to 170 mm Corsair—
Power supplyATX; up to 220 mm long Corsair—
Included fans4 × RS120 PWM; unlit Corsair3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
Front panelRGB Flow; 64 LEDs; 5 V ARGB Corsair—
Front I/O20 Gbit/s USB-C; 2 × 5 Gbit/s USB-A; combined headphone/microphone Corsair2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
ControlsPower button; no reset switch or drive activity LED Corsair—
Front/top fan railsFront fans up to 200 mm; top fans up to 140 mm Corsair—
Radiator mountsFront/top/side: 240, 280 or 360 mm; rear: 120 or 140 mm Corsair—
SATA drive bracket2 × 2.5-inch SSDs or 1 × 3.5-inch HDD Corsair—
Cable clearance37 mm behind the motherboard Corsair—
Dust filtersFront, side and bottom Corsair—
Vertical GPU mountingRotatable PCIe bracket; riser cable separate Corsair—
iCUE LINK lightingSeparate RGB adapter, compatible LINK hub and iCUE 5 required

Motherboard ARGB software is a separate control option.

Corsair
—
Case type and materials—Compact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
Size and weight—435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
Motherboard and expansion—ATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Component clearance—Graphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
Fan support—Front-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
Radiator support—Up to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
Storage and assembly—2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT