NZXT H6 Flow / Corsair 4000D Airflow

NZXT H6 Flow: Applies to the non-RGB H6 Flow (CC-H61FB-01 black, CC-H61FW-01 white) with three F120Q fans. The H6 Flow RGB (CC-H61FBR1/FWR1) ships with RGB fans and is a separate model.

Corsair 4000D Airflow: Black CC-9011200-WW; tempered-glass mid-tower.

SpecificationNZXT H6 FlowCorsair 4000D Airflow
Release year20232020
Case type and materialsCompact dual-chamber mid-tower; SGCC steel, ultra-clear tempered glass (dark tinted glass on the black model); integrated mesh filter

In a dual-chamber design the power supply and cables sit in a separate compartment behind the motherboard tray; the main chamber shows only the motherboard, graphics card and cooling. The glass panels meet at the front corner without a pillar, giving an unobstructed view inside.

NZXT
—
Size and weight435 x 287 x 415 mm (H x W x D); 51.8 L; 9.42 kg

The 287 mm width comes from the dual-chamber layout that puts the power supply behind the motherboard; it is wider than classic mid-towers but shorter and shallower.

NZXT
453 × 230 × 466 mm; 9.15 kg; tempered-glass side panel

For transport, remove and protect the glass panel separately.

Corsair
Motherboard and expansionATX, Micro-ATX, Mini-ITX; 7 expansion slots; no back-connect motherboard support

Back-connect motherboards are newer designs that take cables from the rear of the board; this case does not support them.

NZXT
Mini-ITX, microATX, ATX, E-ATX 305×277 mm; 7 horizontal + 2 vertical slots

Vertical GPU mounting needs a separately sold riser; wide cards reduce front-radiator space.

Corsair
Component clearanceGraphics card up to 365 mm, CPU cooler up to 163 mm, power supply up to 200 mm; 91 mm cable routing space

NZXT's figures are the case's maximum limits; bottom fans or thick radiators can change the usable space. The power supply type is ATX.

NZXT
360 mm GPU; 170 mm CPU cooler; 220 mm PSU

A front radiator and thick fans consume part of the 360 mm GPU limit; components must be measured together.

Corsair
Fan supportFront-right 3 x 120 mm (3 included); top 3 x 120 mm or 2 x 140 mm; bottom 2 x 140 mm; rear 1 x 120 mm

The three front-right fans are angled and blow air directly towards the graphics card and motherboard area. According to NZXT the bottom slots are for 140 mm fans.

NZXT
—
Radiator supportUp to 360 mm on top and 120 mm at the rear; top radiator up to 30 mm thick (about 60 mm with fans)

NZXT notes that thicker radiator and fan combinations may hit the motherboard's rear I/O, power connectors or VRM cooling.

NZXT
—
Included fans3 x F120Q (Case Version); 1,200 ± 240 RPM; 62.18 CFM; 1.05 mmH₂O; 25.1 dBA; 3-pin DC

3-pin DC fans are speed-controlled by voltage, which gives coarser control than 4-pin PWM fans. RGB lighting is only on the H6 Flow RGB version.

NZXT
—
Front I/O2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, 1 x headset jack

The Type-C port needs a matching front-panel USB-C header on the motherboard. The ports sit on the lower front edge.

NZXT
1× USB-C 3.1, 1× USB-A 3.0, combo audio

The single USB-A port may require a hub for many peripherals.

Corsair
Storage and assembly2 x 2.5-inch, 1 x 3.5-inch bays; tool-free access to top and side panels; wide cable channels and straps

The box contains the case, three pre-installed fans, installation accessories and a user guide. Model numbers are CC-H61FW-01 (white) and CC-H61FB-01 (black); the warranty is 2 years.

NZXT
—
Fans and radiator—Front 3×120/2×140, top 2×120/2×140, rear 1×120; two 120 mm fans included

Radiators: front 360/280, top 240/280 depending on RAM, rear 120 mm.

Corsair
Storage—2×3.5-inch + 4×2.5-inch bays

The drive cage shares the lower compartment with long PSUs and cables.

Corsair