Corsair 4000D Airflow / Lian Li LANCOOL 215 (black, 215X)

Corsair 4000D Airflow: Black CC-9011200-WW; tempered-glass mid-tower.

Lian Li LANCOOL 215 (black, 215X): LANCOOL 215X, the black model; the white version is coded LANCOOL 215W and has the same specifications. LANCOOL II Mesh, LANCOOL 216 and 217 are separate cases.

SpecificationCorsair 4000D AirflowLian Li LANCOOL 215 (black, 215X)
Release year20202020
Motherboard and expansionMini-ITX, microATX, ATX, E-ATX 305×277 mm; 7 horizontal + 2 vertical slots

Vertical GPU mounting needs a separately sold riser; wide cards reduce front-radiator space.

Corsair
—
Component clearance360 mm GPU; 170 mm CPU cooler; 220 mm PSU

A front radiator and thick fans consume part of the 360 mm GPU limit; components must be measured together.

Corsair
—
Fans and radiatorFront 3×120/2×140, top 2×120/2×140, rear 1×120; two 120 mm fans included

Radiators: front 360/280, top 240/280 depending on RAM, rear 120 mm.

Corsair
—
Storage2×3.5-inch + 4×2.5-inch bays

The drive cage shares the lower compartment with long PSUs and cables.

Corsair
2 × 2.5″ SSD behind the motherboard tray; drive cage 2 × 3.5″ HDD or 1 × 3.5″ HDD + 1 × 2.5″ SSD

The drive cage is removable and adjustable.

Lian Li
Front I/O1× USB-C 3.1, 1× USB-A 3.0, combo audio

The single USB-A port may require a hub for many peripherals.

Corsair
Power and reset buttons, lighting mode button, 1 × HD audio, 2 × USB 3.0

There is no USB-C. The lighting button cycles 8 modes and 7 colours; holding it for 3 seconds hands lighting control to the motherboard.

Lian Li
Size and weight453 × 230 × 466 mm; 9.15 kg; tempered-glass side panel

For transport, remove and protect the glass panel separately.

Corsair
—
Models and colour—LANCOOL 215X (black), LANCOOL 215W (white) Lian Li
Dimensions—462 mm depth × 215 mm width × 482 mm height Lian Li
Materials—Steel; 4.0 mm tempered glass side panel Lian Li
Motherboard support—E-ATX (under 280 mm wide), ATX, M-ATX, ITX

Most budget cases this size do not take E-ATX; Lian Li supports E-ATX boards up to 280 mm wide.

Lian Li
Included fans—Front 2 × 200 mm 3-pin 800 RPM ARGB; rear 1 × 120 mm 3-pin 1100 RPM

The 200 mm fans sit behind the mesh panel, outside the chassis frame; according to Lian Li this leaves room to front-mount a 360 mm radiator without removing them. The fans connect to the pre-installed hub.

Lian Li
Fan support—Front (inside): 3 × 120 mm or 2 × 140 mm; top: 2 × 120 mm or 2 × 140 mm; top of PSU chamber: 2 × 120 mm; up to 7 fans/radiators Lian Li
Radiator support—Front: 280 or 360 mm (max 70 mm thick); top: 240 or 280 mm (max 55 mm thick)

The thickness limits apply to radiator plus fan combined.

Lian Li
Clearances—Graphics card 370 mm; CPU cooler 166 mm; power supply 210 mm Lian Li
Expansion slots—7

Vertical graphics card mounting is not included out of the box; Lian Li offers the optional LANCOOL II-1X kit for it.

Lian Li
Fan and lighting hub—Pre-installed hub; powers 3 additional fans and 1 additional ARGB device Lian Li
Cable management—22 mm space behind the motherboard; rubber grommets, cable tie points and Velcro straps Lian Li
Dust filters—Magnetic top filter, removable full-length bottom tray; mesh front panel

No separate fine dust filter is listed behind the front mesh; the mesh only stops coarse dust.

Lian Li